AirTAC P-SI63N-R1 – Pneumatic Cylinder Repair Seal Kit for ISO15552 SI Series Bore 63mm
Looking for a genuine factory repair seal kit to restore airtight sealing and smooth cushioning to your 63mm bore AirTAC ISO15552 SI series cylinder? The AirTAC P-SI63N-R1 is an authentic OEM replacement seal kit engineered specifically for AirTAC SI series pneumatic cylinders with a 63mm bore (N standard version).
Key Features of AirTAC P-SI63N-R1
✅ Genuine AirTAC OEM repair seal kit tailored for ISO15552 SI series cylinders with a 63mm bore.
✅ Complete factory-matched sealing set: includes two-way piston seal, integrated rod/wiper seal, air cushion seals, and end-cap O-rings.
✅ Molded from high-grade NBR and Polyurethane (TPU) elastomers for superior wear resistance and long service life.
✅ Restores both pneumatic chamber tightness and adjustable end-of-stroke air cushioning performance.
✅ Cost-effective maintenance solution that extends cylinder service life without replacing the entire actuator.

Technical Specifications
✅ Model: P-SI63N-R1 (PSI63NR1)
✅ Product type: Pneumatic Cylinder Repair Seal Kit
✅ Compatible cylinder series: AirTAC ISO15552 SI series (SI63, SID63, SIJ63, etc.)
✅ Compatible bore size: 63 mm
✅ Seal materials: High-durability NBR / Polyurethane (TPU)
✅ Operating pressure rating: 0.1 – 1.0 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Preventive maintenance and full overhaul of AirTAC SI63 cylinders in automated production lines
✅ Eliminating rod seal leakage, internal piston blow-by, and end-of-stroke cushion loss on 63mm bore cylinders
✅ Essential spare parts inventory for plant maintenance teams in packaging, food, beverage, woodworking, and metalworking plants
✅ Restoring factory-grade sealing after replacing a piston rod or barrel on SI63 actuators
Why Choose the AirTAC P-SI63N-R1?
Installing the genuine AirTAC P-SI63N-R1 repair kit restores full output thrust, zero-leakage sealing, and smooth end-of-stroke deceleration to your SI63 cylinder. Exact OEM dimensions and elastomer compounds prevent premature seal wear and maximize uptime.
Selection & Installation Tips
✅ Verify that the cylinder nameplate specifies the ISO15552 SI series with a 63mm bore before ordering.
✅ Thoroughly clean all old grease, dirt, and residue from the cylinder barrel and end-cap grooves prior to reassembly.
✅ Lubricate all new seals and cushion rings in the P-SI63N-R1 kit with pneumatic cylinder grease before installation to prevent lip damage.
✅ Re-adjust the cushion needle screws on both end caps and test for leaks at low pressure before returning the cylinder to service.
Hotline: 0084 787900099