AirTAC P-ACE80-R1 – Pneumatic Cylinder Repair Seal Kit for ACE Series Bore 80mm
Looking for an original factory repair seal kit to eliminate air leaks and restore full thrust to your 80mm bore AirTAC ACE compact cylinder? The AirTAC P-ACE80-R1 is a genuine OEM replacement seal kit engineered specifically for AirTAC ACE series pneumatic cylinders with an 80mm bore (including ACE, ACED, and ACEJ models).
Key Features of AirTAC P-ACE80-R1
✅ Genuine AirTAC OEM repair seal kit tailored for ACE series cylinders with an 80mm bore.
✅ Complete factory-matched sealing set: includes piston seal, rod seal, wiper/dust seal, end-cap O-rings, and bumper rings.
✅ Molded from high-grade NBR and Polyurethane (TPU) elastomers for superior abrasion resistance and long service life.
✅ Precision tolerances match original ACE80 seal grooves, ensuring zero air bypass and low sliding friction.
✅ Cost-effective maintenance solution that restores existing cylinders to peak performance without full unit replacement.

Technical Specifications
✅ Model: P-ACE80-R1 (PACE80R1)
✅ Product type: Pneumatic Cylinder Repair Seal Kit
✅ Compatible cylinder series: AirTAC ACE series (ACE80, ACED80, ACEJ80, etc.)
✅ Compatible bore size: 80 mm
✅ Seal materials: High-durability NBR / Polyurethane (TPU)
✅ Operating pressure rating: 0.1 – 1.0 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Preventive maintenance and overhaul of AirTAC ACE80 cylinders in continuous production lines
✅ Eliminating rod seal leakage, internal piston blow-by, and thrust loss on 80mm bore cylinders
✅ Spare parts inventory for plant maintenance teams in packaging, food processing, metalworking, and assembly industries
✅ Restoring airtight integrity following cylinder barrel cleaning or piston rod replacement
Why Choose the AirTAC P-ACE80-R1?
Installing the genuine AirTAC P-ACE80-R1 repair kit restores original factory sealing efficiency and smooth low-friction actuation to your ACE80 cylinder. Proper seal geometry and elastomer hardness prevent premature wear and protect the anodized aluminum bore.
Selection & Installation Tips
✅ Verify that the cylinder nameplate specifies the ACE series with an 80mm bore before ordering.
✅ Thoroughly clean all old grease, dust, and debris from the cylinder barrel and seal grooves prior to installation.
✅ Apply a thin coat of pneumatic cylinder grease (lithium- or silicone-based) to the new seals in the P-ACE80-R1 kit before assembly to prevent lip nicking.
✅ Pressure-test the rebuilt cylinder at low pressure to verify smooth, leak-free stroking before returning it to full production.
Hotline: 0084 787900099