Our News & Events

Home / News
AirTAC 2WAH030-08 – 2/2 Way Direct Acting Fluid Solenoid Valve PT 1/4" Port Genuine

AirTAC 2WAH030-08 – 2/2 Way Direct Acting Fluid Solenoid Valve PT 1/4" Port Genuine

Events, Article & Sharing      17/11/2026

AirTAC 2WAH030-08 – 2/2 Way Direct Acting Fluid Solenoid Valve PT 1/4" Port

Looking for a rugged 2/2 way brass solenoid valve with standard PT 1/4" ports to control water, compressed air, light oil, or elevated-temperature fluids? The AirTAC 2WAH030-08 belongs to the 2WA fluid solenoid valve series by AirTAC. It features a normally closed direct-acting design (NC), a 3.0mm orifice, a high-temperature FKM/Viton seal (H), and PT 1/4" threaded ports.

Key Features of AirTAC 2WAH030-08

✅ 2-port, 2-position direct-acting normally closed solenoid valve (2WA series – 2/2 Way NC).

✅ Orifice size: 3.0 mm (030).

✅ Port connection size: PT 1/4" (08).

✅ High-temperature seal material: FKM / Viton (H suffix), compatible with hot water, compressed air, light oils, and mild industrial fluids.

✅ Zero minimum operating pressure (0 MPa direct-acting design) ensures reliable opening even in gravity-fed or low-pressure lines.

✅ Heavy-duty forged brass body resists corrosion, paired with an IP65 dust-tight and splash-proof coil enclosure.

Technical Specifications

✅ Model: 2WAH030-08 (2WAH03008)

✅ Series: 2WA (2/2 Way Direct Acting Fluid Solenoid Valve)

✅ Valve function: 2 ports, 2 positions, normally closed (2/2 Way NC)

✅ Actuation method: Direct acting type

✅ Orifice diameter: 3.0 mm (Cv = 0.30)

✅ Port size: PT 1/4"

✅ Body material: Forged brass

✅ Seal material: High-temperature FKM / Viton (H suffix)

✅ Operating pressure range: 0 – 0.7 MPa (varies by AC/DC coil voltage)

✅ Proof pressure: 1.5 MPa

✅ Operating temperature: -10°C ~ +120°C (with FKM/Viton seal)

✅ Fluid: Air, water, hot water, light oil (viscosity under 20 CST)

✅ Coil protection class: IP65

Typical Applications

✅ Automated on/off control of water, hot water, compressed air, and lubrication lines in industrial machinery

✅ Cooling water circuits for injection molding machines, welders, laser cutters, and heat exchangers

✅ Beverage dispensing lines, commercial laundry equipment, and compact steam/boiler auxiliaries

✅ Automated irrigation, water treatment, and low-pressure gravity-fed fluid systems

✅ 1/4" piping applications requiring higher thermal resistance than standard NBR seals

Why Choose the AirTAC 2WAH030-08?

The AirTAC 2WAH030-08 combines zero-differential direct actuation with a forged brass body, standard 1/4" ports, and high-temperature FKM seals rated up to 120°C. Its fast response, reliable seal performance, and IP65-rated coil make it a dependable choice for fluid control.

Selection & Installation Tips

✅ Confirm the 2WAH030-08 specification (3.0mm orifice, PT 1/4" ports, H high-temp seal) and select the required coil voltage (such as A: AC220V, B: DC24V, C: AC110V, E: DC12V).

✅ Install the valve following the flow direction arrow cast onto the brass body, ideally with the solenoid coil oriented upright.

✅ Fit an upstream Y-strainer to prevent debris from fouling the plunger or damaging the FKM seat.

✅ Apply PTFE thread tape carefully to the PT 1/4" fittings so shreds do not enter the valve orifice.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login