AirTAC MU10x6 – Free-Mount Ultra-Compact Mini Pneumatic Cylinder Bore 10 × Stroke 6mm
Looking for an ultra-compact pneumatic cylinder with a short 6mm stroke that mounts directly onto multiple surfaces without bulky external brackets? The AirTAC MU10x6 belongs to the space-saving MU free-mount series by AirTAC. It features a 10mm bore, 6mm stroke, double-acting operation, and a precision-machined aluminum body for versatile direct installation.
Key Features of AirTAC MU10x6
✅ Ultra-compact free-mount mini pneumatic cylinder (MU series – Double Acting).
✅ Bore: 10 mm.
✅ Stroke: 6 mm.
✅ Action: Double acting.
✅ Non-magnetic piston (standard version; choose AirTAC MU10x6S if magnetic sensor mounting is required).
✅ Machined aluminum body with integrated mounting flats and tapped holes supports direct multi-axis installation in tight spaces.
✅ Featherweight, low-inertia construction delivers crisp, rapid actuation over a short 6mm travel.
✅ Built-in rubber bumpers at both ends soften end-of-stroke impact and require no additional air line lubrication.

Technical Specifications
✅ Model: MU10x6 (MU10X6)
✅ Series: MU (Free Mount Mini Round Cylinder)
✅ Bore: 10 mm
✅ Stroke: 6 mm
✅ Rod diameter: 4 mm (M4×0.7 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Operating speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Ultra-short stroke (6mm) micro-component pushing, diverting, stopping, and indexing in electronics and semiconductor assembly
✅ PCB handling, automated medical devices, optical instruments, and precision micro-mechanics
✅ High-speed miniature packaging, labeling, and filling equipment with severely restricted space
✅ Compact fixtures requiring direct body mounting in multiple orientations
✅ Functional replacement for free-mount mini cylinders such as SMC CU / CDU series
Why Choose the AirTAC MU10x6?
The AirTAC MU10x6 eliminates extra mounting hardware while delivering fast, repeatable linear motion in a 6mm stroke. Its ultra-slim profile, low moving mass, and lubrication-free operation make it an economical, reliable choice for dense automation assemblies.
Selection & Installation Tips
✅ Confirm 10mm bore, 6mm stroke, and M4×0.7 piston rod thread match your machine layout.
✅ Note that MU10x6 is non-magnetic; select AirTAC MU10x6S if magnetic position sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Use M5×0.8 pneumatic fittings equipped with sealing washers and avoid radial side loads on the 4mm piston rod.
Hotline: 0084 787900099