AirTAC TN20x60S – Twin-Rod Pneumatic Cylinder Bore 20 × Stroke 60mm
Looking for a JIS standard twin-rod pneumatic cylinder offering exceptional anti-rotation precision and strong side-load capacity? The AirTAC TN20x60S belongs to the TN series by AirTAC. It features a 20mm bore, 60mm stroke, double-acting operation, a standard integrated magnet (S), and rubber bumpers at both ends.
Key Features of AirTAC TN20x60S
✅ JIS standard twin-rod pneumatic cylinder (TN series).
✅ Bore: 20 mm (delivers double the output force of a single-rod cylinder of the same bore).
✅ Stroke: 60 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Exceptional anti-rotation accuracy provided by parallel twin piston rods linked to a common front mounting plate.
✅ Superior resistance to lateral loads and torsional moments compared to standard single-rod cylinders.
✅ Integrated sensor mounting slots along the body and precision locating holes on the front plate.

Technical Specifications
✅ Model: TN20x60S (TN20X60S)
✅ Series: TN (JIS Standard Twin-Rod Cylinder)
✅ Bore: 20 mm
✅ Stroke: 60 mm
✅ Rod diameter: 10 mm × 2 rods
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure range: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pushing, diverting, lifting, and clamping mechanisms on automated conveyors requiring strict plate anti-rotation
✅ Packaging, filling, labeling, textile, and food processing lines
✅ Electronics, semiconductor, precision machining, and pick-and-place assembly stations
✅ Industrial jigs subjected to heavy lateral forces without requiring external guide rails
✅ Direct functional replacement for JIS standard twin-rod cylinders such as SMC CXSM series
Why Choose the AirTAC TN20x60S?
The AirTAC TN20x60S eliminates rod twisting through its robust parallel twin-rod layout while doubling linear thrust output. With standard magnetic sensing, reliable rubber cushioning, and standard PT 1/8" ports, it ensures dependable, maintenance-free operation.
Selection & Installation Tips
✅ Confirm 20mm bore, 60mm stroke, magnetic piston (S), and PT 1/8" air ports match your machine setup.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots for stroke-end feedback.
✅ Use speed controllers on both air ports to ensure smooth table deceleration and prevent harsh end-of-stroke impact.
Hotline: 0084 787900099