AirTAC HFR10 – 180-Degree Angular Pneumatic Air Gripper Bore 10mm
Looking for a compact pneumatic air gripper with a full 180-degree opening angle so the jaws retract completely clear of surrounding parts? The AirTAC HFR10 belongs to the 180° angular gripper HFR series by AirTAC. It features a 10mm bore, double-acting operation, and a standard integrated magnet for position sensing.
Key Features of AirTAC HFR10
✅ 180-degree wide-opening angular pneumatic air gripper (HFR series).
✅ Bore: 10 mm.
✅ Action: Double acting (pneumatic open and close).
✅ Full 180° jaw opening retracts fingers completely flat to both sides, eliminating clearance interference during pick-and-place cycles.
✅ Precision cam-and-lever mechanism delivers synchronized jaw movement, consistent gripping force, and high repeatability.
✅ Standard built-in magnet and integrated body sensor slots enable effortless open/close status detection.
✅ Ultra-lightweight hard-anodized aluminum body is ideal for high-speed robotic end-of-arm tooling.

Technical Specifications
✅ Model: HFR10
✅ Series: HFR (180° Angular Pneumatic Air Gripper)
✅ Bore: 10 mm
✅ Action: Double acting
✅ Opening angle: 180° (full flat retraction)
✅ Closing angle: -3° ~ 0°
✅ Magnet: Yes (built-in standard)
✅ Operating pressure range: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Maximum operating frequency: 120 cycles/min
✅ Repeatability: ±0.05 mm
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M3 × 0.5
✅ Lubrication: Not required
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pick-and-place handling stations requiring 180° jaw clearance to avoid colliding with adjacent workpieces
✅ Micro-component assembly in electronics, semiconductor, PCB, and medical device manufacturing
✅ Automated packaging lines placing items into deep trays or narrow-walled cartons
✅ High-speed delta robots and collaborative robot (cobot) grippers requiring minimal payload mass
✅ Functional replacement for 180° angular air grippers such as SMC MHY2-10D
Why Choose the AirTAC HFR10?
The AirTAC HFR10 eliminates jaw-clearance bottlenecks in dense automation cells with its full 180° swing angle. Offering ±0.05mm repeatability, built-in magnetic sensing, and lubrication-free operation in a featherweight housing, it boosts cycle speed and reliability.
Selection & Installation Tips
✅ Confirm the HFR10 specification (10mm bore, double-acting) and verify that custom finger length and gripping force match your workpiece weight.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Install speed controllers on both M3×0.5 air ports to ensure smooth jaw actuation without internal impact shock.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots to confirm open/closed jaw positions.
Hotline: 0084 787900099