AirTAC 2WAH030-06 – 2/2 Way Direct Acting Fluid Solenoid Valve PT 1/8" Port
Looking for a rugged 2/2 way brass solenoid valve capable of controlling water, compressed air, light oil, or elevated-temperature fluids? The AirTAC 2WAH030-06 belongs to the 2WA fluid solenoid valve series by AirTAC. It features a normally closed direct-acting design (NC), a 3.0mm orifice, a high-temperature FKM/Viton seal (H), and PT 1/8" threaded ports.
Key Features of AirTAC 2WAH030-06
✅ 2-port, 2-position direct-acting normally closed solenoid valve (2WA series – 2/2 Way NC).
✅ Orifice size: 3.0 mm (030).
✅ Port connection size: PT 1/8" (06).
✅ High-temperature seal material: FKM / Viton (H suffix), compatible with hot water, compressed air, light oils, and mild industrial fluids.
✅ Zero minimum operating pressure (0 MPa direct-acting design) ensures reliable opening even in gravity-fed or low-pressure lines.
✅ Heavy-duty forged brass body resists corrosion, paired with an IP65 dust-tight and splash-proof coil enclosure.

Technical Specifications
✅ Model: 2WAH030-06 (2WAH03006)
✅ Series: 2WA (2/2 Way Direct Acting Fluid Solenoid Valve)
✅ Valve function: 2 ports, 2 positions, normally closed (2/2 Way NC)
✅ Actuation method: Direct acting type
✅ Orifice diameter: 3.0 mm (Cv = 0.30)
✅ Port size: PT 1/8"
✅ Body material: Forged brass
✅ Seal material: High-temperature FKM / Viton (H suffix)
✅ Operating pressure range: 0 – 0.7 MPa (varies by AC/DC coil voltage)
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -10°C ~ +120°C (with FKM/Viton seal)
✅ Fluid: Air, water, hot water, light oil (viscosity under 20 CST)
✅ Coil protection class: IP65
Typical Applications
✅ Automated on/off control of water, hot water, compressed air, and lubrication lines in industrial machinery
✅ Cooling water circuits for injection molding machines, welders, laser cutters, and heat exchangers
✅ Beverage dispensing lines, commercial laundry equipment, and compact steam/boiler auxiliaries
✅ Automated irrigation, water treatment, and low-pressure gravity-fed fluid systems
✅ Compact 1/8" piping applications requiring higher thermal resistance than standard NBR seals
Why Choose the AirTAC 2WAH030-06?
The AirTAC 2WAH030-06 combines zero-differential direct actuation with a corrosion-resistant brass body and high-temperature FKM seals rated up to 120°C. Its compact form factor, fast response, and IP65-rated coil make it a dependable choice for industrial fluid control.
Selection & Installation Tips
✅ Confirm the 2WAH030-06 specification (3.0mm orifice, PT 1/8" ports, H high-temp seal) and select the required coil voltage (such as A: AC220V, B: DC24V, C: AC110V, E: DC12V).
✅ Install the valve following the flow direction arrow cast onto the brass body, ideally with the solenoid coil oriented upright.
✅ Fit an upstream Y-strainer to prevent debris from fouling the plunger or damaging the FKM seat.
✅ Apply PTFE thread tape carefully to the PT 1/8" fittings so shreds do not enter the valve orifice.
Hotline: 0084 787900099