AirTAC ACQ16x10 – Compact Square Pneumatic Cylinder Bore 16 × Stroke 10mm
Looking for an ultra-compact JIS standard square pneumatic cylinder with a 10mm stroke for tight installation spaces? The AirTAC ACQ16x10 belongs to the standard ACQ series by AirTAC. It features a 16mm bore, 10mm stroke, double-acting operation, an extruded aluminum alloy body, and a standard female-threaded piston rod end.
Key Features of AirTAC ACQ16x10
✅ JIS standard compact square pneumatic cylinder (ACQ series – functionally equivalent to SMC CQ2 series).
✅ Bore: 16 mm.
✅ Stroke: 10 mm.
✅ Action: Double acting.
✅ Piston rod end: Standard female thread M4×0.7 (select B suffix if a male-threaded rod end is required).
✅ Non-magnetic piston (standard version; choose AirTAC ACQ16x10S if magnetic sensor mounting is needed).
✅ Lightweight, corrosion-resistant tie-rodless aluminum body maximizes space efficiency.
✅ Self-lubricating front rod bearing ensures smooth, durable operation without additional air line lubrication.

Technical Specifications
✅ Model: ACQ16x10 (ACQ16X10)
✅ Series: ACQ (JIS Standard Compact Cylinder – Double Acting)
✅ Bore: 16 mm
✅ Stroke: 10 mm
✅ Rod diameter: 8 mm
✅ Rod end type: Female thread M4×0.7 (standard)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (10mm) pushing, diverting, stopping, and positioning mechanisms on automated conveyors
✅ Electronics, PCB, semiconductor, and automated medical device assembly machinery
✅ Small workpiece clamping jigs in precision machining fixtures
✅ Packaging, labeling, filling, and space-restricted industrial machinery
✅ Direct functional replacement for JIS standard compact cylinders such as SMC CQ2B16-10
Why Choose the AirTAC ACQ16x10?
The AirTAC ACQ16x10 features an ultra-slim JIS standardized housing that allows effortless through-hole or bracket mounting. Dual rubber bumpers cushion end-of-stroke impact, while its lubrication-free bearing design keeps maintenance minimal.
Selection & Installation Tips
✅ Confirm 16mm bore, 10mm stroke, and standard M4×0.7 female rod thread (or select AirTAC ACQ16x10B for a male rod thread).
✅ Note that ACQ16x10 is non-magnetic; select AirTAC ACQ16x10S if magnetic stroke-end sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Use M5×0.8 pneumatic fittings with sealing washers for the air ports and avoid applying radial side loads to the 8mm piston rod.
Hotline: 0084 787900099