Our News & Events

Home / News
AirTAC RMH16x250S – Guided Magnetically Coupled Rodless Pneumatic Cylinder Bore 16mm Stroke 250mm Genuine

AirTAC RMH16x250S – Guided Magnetically Coupled Rodless Pneumatic Cylinder Bore 16mm Stroke 250mm Genuine

Events, Article & Sharing      17/11/2026

AirTAC RMH16x250S – Guided Magnetically Coupled Rodless Pneumatic Cylinder Bore 16 × Stroke 250mm

Looking for a space-saving rodless pneumatic cylinder with a 250mm stroke and high-load linear guidance? The AirTAC RMH16x250S (RMH16X250S) belongs to the heavy-duty RMH series by AirTAC. It features a 16mm bore, 250mm stroke, double-acting operation, leak-free magnetic coupling, a precision linear ball bearing guide, and a standard integrated magnet (S).

Key Features of AirTAC RMH16x250S

✅ Magnetically coupled rodless pneumatic cylinder with high-rigidity linear ball bearing guide (RMH series).

✅ Bore: 16 mm.

✅ Stroke: 250 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Compact installation footprint: carriage moves entirely within the cylinder body length, saving nearly half the space of conventional rod cylinders.

✅ Rare-earth permanent magnet coupling between the internal piston and external carriage prevents air leakage and blocks dust ingress.

✅ Integrated linear ball bearing guide rods provide high load capacity, torsional rigidity, and accurate non-rotating travel.

✅ Dual-end rubber bumpers ensure smooth deceleration at the ends of the 250mm stroke (optional hydraulic shock absorbers supported).

Technical Specifications

✅ Model: RMH16x250S (RMH16X250S)

✅ Series: RMH (Magnetically Coupled Rodless Cylinder with Linear Ball Bearing Guide)

✅ Bore: 16 mm

✅ Stroke: 250 mm

✅ Action: Double acting

✅ Drive mechanism: Magnetically coupled

✅ Guide mechanism: Linear ball bearing guide rods

✅ Cushioning: Rubber bumper pads at both ends

✅ Magnet: Yes (S – standard)

✅ Operating pressure: 0.15 – 0.7 MPa (22 ~ 100 psi)

✅ Proof pressure: 1.05 MPa (150 psi)

✅ Operating speed: 50 – 400 mm/s

✅ Operating temperature: -10°C ~ +60°C

✅ Port size: M5 × 0.8 (both ports located on one end cap for neat piping)

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ 250mm-stroke linear traversing for spray heads, cutters, label applicators, and industrial printers

✅ Pick-and-place material handling, automated feeding, and conveyor lane transfer in packaging lines

✅ Electronics, semiconductor, medical device assembly, and automated optical inspection systems

✅ Automated sliding doors and linear drives in length-restricted machine frames

✅ Clean production environments requiring zero air leakage and high straight-line guidance accuracy

Why Choose the AirTAC RMH16x250S?

The AirTAC RMH16x250S solves axial space constraints for 250mm-stroke applications by eliminating protruding piston rods. Its sealed magnetic coupling and integrated linear ball bearing guide allow direct payload mounting without external guide rails.

Selection & Installation Tips

✅ Confirm 16mm bore, 250mm stroke, magnetic piston (S), and verify that payload weight and moment loads stay within RMH16 ratings.

✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.

✅ Use speed controllers on both M5×0.8 end-cap ports to maintain smooth carriage travel within 50 – 400 mm/s.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots and avoid impact loads exceeding the magnetic coupling holding force.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login