AirTAC ACQJ20x25-10S – JIS Compact Adjustable Stroke Pneumatic Cylinder Bore 20 × Stroke 25mm
Looking for a compact JIS standard square pneumatic cylinder that saves installation space while offering fine mechanical stroke adjustment? The AirTAC ACQJ20x25-10S belongs to the ACQJ series by AirTAC. It features a 20mm bore, 25mm base stroke, 10mm stroke adjustment range (-10), double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC ACQJ20x25-10S
✅ JIS standard compact square pneumatic cylinder with rear stroke adjuster (ACQJ series).
✅ Bore: 20 mm.
✅ Stroke: 25 mm (base stroke).
✅ Adjustable stroke range: 10 mm (allows fine-tuning working travel between 15mm and 25mm via a locked rear screw).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard female thread M6×1.0 (select B suffix if a male-threaded rod end is required).
✅ Extruded tie-rodless aluminum alloy body features integrated sensor grooves and a self-lubricating rod bearing for smooth, lubrication-free operation.

Technical Specifications
✅ Model: ACQJ20x25-10S (ACQJ20X25-10S)
✅ Series: ACQJ (JIS Standard Compact Cylinder – Adjustable Stroke)
✅ Bore: 20 mm
✅ Stroke: 25 mm
✅ Adjustable stroke range: 10 mm
✅ Rod diameter: 10 mm
✅ Rod end type: Female thread M6×1.0 (standard)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Component pushing, diverting, stopping, and positioning requiring exact mechanical stop tuning
✅ Electronics, PCB, semiconductor, and automated medical device assembly machinery
✅ Multi-format packaging, labeling, and filling equipment needing rapid changeover adjustments
✅ Small workpiece clamping jigs in precision machining and automated welding fixtures
✅ Direct functional replacement for JIS standard adjustable-stroke compact cylinders
Why Choose the AirTAC ACQJ20x25-10S?
The AirTAC ACQJ20x25-10S combines the space-saving JIS square profile of the ACQ series with a 10mm rear stroke adjuster, enabling quick stop-position calibration without reworking mounting brackets. Its built-in magnetic piston and lubrication-free bearing design ensure dependable performance.
Selection & Installation Tips
✅ Confirm 20mm bore, 25mm base stroke, 10mm adjustment range (-10), magnetic piston (S), and standard M6×1.0 female rod thread (or select AirTAC ACQJ20x25-10SB for a male rod thread).
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Loosen the rear lock nut, rotate the adjustment screw to set the desired working stroke (within 10mm), and re-tighten the lock nut securely.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots and use M5×0.8 fittings with sealing washers.
Hotline: 0084 787900099