AirTAC HLSL8x40S – Compact Precision Pneumatic Air Slide Table Bore 8 × Stroke 40mm
Looking for an ultra-compact pneumatic air slide table with high repeatability and zero-play linear guidance for micro-assembly or pick-and-place equipment? The AirTAC HLSL8x40S belongs to the precision HLSL air slide table series by AirTAC. It features an 8mm bore, 40mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC HLSL8x40S
✅ Ultra-compact precision pneumatic air slide table (HLSL series).
✅ Bore: 8 mm.
✅ Stroke: 40 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Monolithic integration of the pneumatic actuator and precision linear ball guide saves installation height and width.
✅ High straightness accuracy and torsional rigidity prevent table rotation and ensure smooth, backlash-free motion.
✅ Precision locating pin holes on both the sliding table and mounting base ensure repeatable alignment.
✅ Dual-end rubber bumpers and stroke-adjusting screws provide soft, accurate stopping.

Technical Specifications
✅ Model: HLSL8x40S (HLSL8X40S)
✅ Series: HLSL (Compact Precision Air Slide Table)
✅ Bore: 8 mm
✅ Stroke: 40 mm
✅ Action: Double acting
✅ Guide mechanism: Integrated linear ball guide
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Operating speed: 50 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Precision micro-feeding, linear indexing, and workpiece positioning in electronics and semiconductor manufacturing
✅ Pick-and-place end-of-arm tooling, PCB assembly, optical alignment, and automated medical devices
✅ Automated optical inspection (AOI) stations, industrial camera positioning, and micro-welding heads
✅ Ultra-compact sliding fixtures eliminating external guide rail assembly
✅ Functional replacement for miniature precision air slide tables such as SMC MXQ / MXH series
Why Choose the AirTAC HLSL8x40S?
The AirTAC HLSL8x40S combines a pneumatic cylinder and a precision linear ball guide into one low-profile slide unit, eliminating alignment errors and saving valuable machine space. Its integrated sensor slots, locating pin holes, and smooth 40mm stroke deliver dependable micro-automation performance.
Selection & Installation Tips
✅ Confirm 8mm bore, 40mm stroke, magnetic piston (S), and verify that payload weight and moment loads stay within HLSL8 ratings.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots for position detection.
✅ Use speed controllers on both M5×0.8 ports for smooth table travel and tighten mounting bolts to specified torque to avoid distorting the guide rail.
Hotline: 0084 787900099