AirTAC ACQJ50x30-10S – JIS Compact Adjustable Stroke Pneumatic Cylinder Bore 50 × Stroke 30mm
Looking for a high-thrust JIS standard compact square pneumatic cylinder that saves space while allowing fine mechanical stroke adjustment? The AirTAC ACQJ50x30-10S belongs to the ACQJ series by AirTAC. It features a 50mm bore, 30mm base stroke, 10mm stroke adjustment range (-10), double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC ACQJ50x30-10S
✅ JIS standard compact square pneumatic cylinder with rear stroke adjuster (ACQJ series).
✅ Bore: 50 mm (generates high clamping and pushing force within a compact footprint).
✅ Stroke: 30 mm (base stroke).
✅ Adjustable stroke range: 10 mm (allows fine-tuning working travel between 20mm and 30mm via a locked rear screw).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard female thread M10×1.5 (select B suffix if a male-threaded rod end is required).
✅ Extruded tie-rodless aluminum alloy body and self-lubricating rod bearing ensure smooth, durable, lubrication-free operation.

Technical Specifications
✅ Model: ACQJ50x30-10S (ACQJ50X30-10S)
✅ Series: ACQJ (JIS Standard Compact Cylinder – Adjustable Stroke)
✅ Bore: 50 mm
✅ Stroke: 30 mm
✅ Adjustable stroke range: 10 mm
✅ Rod diameter: 20 mm
✅ Rod end type: Female thread M10×1.5 (standard)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Workpiece clamping, press-fitting, light stamping, and conveyor stopping requiring exact stop tuning
✅ Multi-format packaging, filling, and labeling lines needing rapid changeover adjustments
✅ Machining jigs, automated welding fixtures, and automotive or electronics assembly stations
✅ Space-restricted automation machinery demanding high output force from a 50mm bore
✅ Direct functional replacement for JIS standard adjustable-stroke compact cylinders
Why Choose the AirTAC ACQJ50x30-10S?
The AirTAC ACQJ50x30-10S pairs the space-saving JIS square body of the ACQ series with a 10mm rear stroke adjuster, allowing technicians to fine-tune stopping positions without modifying fixtures. Its built-in magnetic piston, sturdy construction, and lubrication-free design keep downtime minimal.
Selection & Installation Tips
✅ Confirm 50mm bore, 30mm base stroke, 10mm adjustment range (-10), magnetic piston (S), and standard M10×1.5 female rod thread (or select AirTAC ACQJ50x30-10SB for a male rod thread).
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Loosen the rear lock nut, turn the adjustment screw to set the desired working stroke (within 10mm), and re-tighten the lock nut securely.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots and use PT 1/4" fittings for the air ports.
Hotline: 0084 787900099