AirTAC MDJ10x20-10S – Multi-Mount Adjustable Stroke Mini Pneumatic Cylinder Bore 10 × Stroke 20mm
Looking for an ultra-compact pneumatic cylinder that offers direct multi-angle mounting along with fine mechanical stroke adjustment? The AirTAC MDJ10x20-10S belongs to the MDJ series by AirTAC. It features a 10mm bore, 20mm base stroke, 10mm stroke adjustment range (-10), double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC MDJ10x20-10S
✅ Multi-mount mini round pneumatic cylinder with rear stroke adjuster (MDJ series).
✅ Bore: 10 mm.
✅ Stroke: 20 mm (base stroke).
✅ Adjustable stroke range: 10 mm (allows fine-tuning working travel between 10mm and 20mm via a locked adjustment screw).
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Machined aluminum body with integrated mounting flats and tapped holes supports direct multi-axis installation.
✅ Built-in rubber bumpers cushion end-of-stroke impact and require no additional air line lubrication.

Technical Specifications
✅ Model: MDJ10x20-10S (MDJ10X20-10S)
✅ Series: MDJ (Multi-Mount Mini Round Cylinder – Adjustable Stroke)
✅ Bore: 10 mm
✅ Stroke: 20 mm
✅ Adjustable stroke range: 10 mm
✅ Rod diameter: 4 mm (M4×0.7 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Operating speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Micro-component pushing, light pressing, positioning, and stopping requiring exact mechanical stop tuning
✅ Electronics, PCB, semiconductor, optical, and automated medical device assembly machinery
✅ Multi-format packaging, labeling, and filling equipment needing quick changeover adjustments
✅ Space-restricted fixtures requiring direct multi-axis body mounting
✅ Miniature automation stations combining mechanical stroke limiting with magnetic sensor feedback
Why Choose the AirTAC MDJ10x20-10S?
The AirTAC MDJ10x20-10S combines a space-saving multi-mount body with a 10mm rear stroke adjuster for precise stop positioning. With its standard magnetic piston and lubrication-free design, it delivers repeatable accuracy and effortless setup in tight machine assemblies.
Selection & Installation Tips
✅ Confirm 10mm bore, 20mm base stroke, 10mm adjustment range (-10), and magnetic piston (S) match your application.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Loosen the rear lock nut, rotate the adjustment screw to set the desired travel (within 10mm), and re-tighten the lock nut securely.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) onto the body and use M5×0.8 fittings with sealing washers.
Hotline: 0084 787900099