Our News & Events

Home / News
AirTAC MAC16x300SU – Stainless Steel Mini Round Pneumatic Cylinder Flat-End Bore 16mm Stroke 300mm Genuine

AirTAC MAC16x300SU – Stainless Steel Mini Round Pneumatic Cylinder Flat-End Bore 16mm Stroke 300mm Genuine

Events, Article & Sharing      17/11/2026

AirTAC MAC16x300SU – Stainless Steel Mini Round Pneumatic Cylinder Bore 16 × Stroke 300mm

Looking for a corrosion-resistant stainless steel mini round pneumatic cylinder with a long 300mm stroke, adjustable air cushioning, and a space-saving flat rear cap? The AirTAC MAC16x300SU belongs to the MAC series by AirTAC. It features a 16mm bore, 300mm stroke, double-acting operation, a built-in magnet (S), and a flat-end back cover (U).

Key Features of AirTAC MAC16x300SU

✅ Stainless steel barrel mini round pneumatic cylinder with adjustable air cushions (MAC series).

✅ Bore: 16 mm.

✅ Stroke: 300 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.

✅ Flat-end back cover (U) reduces overall cylinder length when rear pivot mounting is not required.

✅ Dual-end adjustable air cushions absorb kinetic energy smoothly across the 300mm stroke.

✅ SUS304 stainless steel barrel resists corrosion and operates reliably without extra air line lubrication.

Technical Specifications

✅ Model: MAC16x300SU (MAC16X300SU)

✅ Series: MAC (Stainless Steel Mini Round Cylinder with Air Cushion)

✅ Bore: 16 mm

✅ Stroke: 300 mm

✅ Rod diameter: 6 mm (M6×1.0 rod thread)

✅ Action: Double acting

✅ Cushioning: Adjustable air cushion at both ends

✅ Magnet: Yes (S – standard)

✅ Back cover type: Flat-end type (U)

✅ Operating pressure: 0.15 – 1.0 MPa (22 ~ 145 psi)

✅ Proof pressure: 1.5 MPa (215 psi)

✅ Operating speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: M5 × 0.8

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Long-stroke (300mm) pushing, diverting, transferring, and sorting mechanisms on conveyors

✅ Packaging, filling, food, beverage, and pharmaceutical lines requiring a stainless steel barrel

✅ Electronics assembly, textile, printing, and automated medical device equipment

✅ Length-restricted machine layouts benefiting from the compact U flat-end rear cover

✅ High-humidity industrial environments requiring smooth deceleration at stroke ends

Why Choose the AirTAC MAC16x300SU?

The AirTAC MAC16x300SU pairs a durable SUS304 stainless steel barrel with dual adjustable air cushions to prevent harsh end-of-stroke impacts over a 300mm travel. Its compact U flat rear cap saves axial space, while the standard magnet allows effortless position feedback.

Selection & Installation Tips

✅ Confirm 16mm bore, 300mm stroke, magnetic piston (S), and flat-end back cover (U) match your machine design.

✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.

✅ Mount compatible magnetic sensors (such as CMSG/DMSG with BMA16 mounting band) onto the stainless steel barrel.

✅ Fine-tune the cushion needle screws on both end caps for smooth 300mm travel and avoid radial side loads on the 6mm piston rod.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login