AirTAC SDA20x15S – Compact Square Pneumatic Cylinder Bore 20 × Stroke 15mm
Looking for a space-saving compact square pneumatic cylinder with a 15mm stroke and built-in magnetic position sensing? The AirTAC SDA20x15S (SDA20X15S) belongs to the standard SDA compact cylinder series by AirTAC. It features a 20mm bore, 15mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SDA20x15S
✅ Compact square pneumatic cylinder (SDA series – Standard Double Acting).
✅ Bore: 20 mm.
✅ Stroke: 15 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Piston rod end: Standard female thread M6×1.0 (select B suffix if a male-threaded rod end is required).
✅ Circlip-retained front cover reduces overall body length and saves valuable installation space.
✅ Integrated body sensor slots and self-lubricating rod bearing ensure smooth, durable, lubrication-free operation.

Technical Specifications
✅ Model: SDA20x15S (SDA20X15S)
✅ Series: SDA (Compact Cylinder – Standard Double Acting)
✅ Bore: 20 mm
✅ Stroke: 15 mm
✅ Rod diameter: 8 mm
✅ Rod end type: Female thread M6×1.0 (standard)
✅ Action: Double acting
✅ Cushioning: NBR rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (15mm) pushing, diverting, stopping, and positioning mechanisms on automated conveyors
✅ Electronics, PCB, semiconductor, and automated medical device assembly machinery
✅ Workpiece clamping jigs in precision machining and automated welding fixtures
✅ Packaging, filling, labeling, textile, and food processing lines
✅ Automated stations requiring stroke-end feedback via magnetic proximity switches
Why Choose the AirTAC SDA20x15S?
The AirTAC SDA20x15S pairs an ultra-compact aluminum square housing with a standard magnetic piston and flush sensor grooves. Its hard-anodized finish resists wear and corrosion, while dual rubber bumpers soften end-of-stroke impact for reliable, low-maintenance operation.
Selection & Installation Tips
✅ Confirm 20mm bore, 15mm stroke, magnetic piston (S), and standard M6×1.0 female rod thread (or select AirTAC SDA20x15SB for a male rod thread).
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated barrel slots.
✅ Use M5×0.8 pneumatic fittings equipped with sealing washers for the air ports and avoid radial side loads on the 8mm piston rod.
Hotline: 0084 787900099