AirTAC MD10x20S – Multi-Mount Mini Pneumatic Cylinder Bore 10 × Stroke 20mm
Looking for an ultra-compact pneumatic cylinder with versatile direct-mounting surfaces that eliminate bulky external brackets? The AirTAC MD10x20S (MD10X20S) belongs to the MD multi-mount series by AirTAC. It features a 10mm bore, 20mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC MD10x20S
✅ Multi-mount mini pneumatic cylinder (MD series – Double Acting).
✅ Bore: 10 mm.
✅ Stroke: 20 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Machined aluminum body with integrated mounting flats and tapped holes enables direct multi-axis installation in tight spaces.
✅ Lightweight, low-inertia moving parts deliver fast actuation response for precision micro-automation.
✅ Built-in rubber bumpers at both ends soften end-of-stroke impact and require no additional air line lubrication.

Technical Specifications
✅ Model: MD10x20S (MD10X20S)
✅ Series: MD (Multi-Mount Mini Round Cylinder)
✅ Bore: 10 mm
✅ Stroke: 20 mm
✅ Rod diameter: 4 mm (M4×0.7 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.15 – 0.7 MPa (22 ~ 100 psi)
✅ Proof pressure: 1.05 MPa (150 psi)
✅ Operating speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Micro-component pushing, diverting, stopping, and positioning in electronics and semiconductor assembly
✅ PCB handling, automated medical devices, optical instruments, and precision watchmaking machinery
✅ High-speed miniature packaging, labeling, and filling stations with severely limited space
✅ Compact fixtures requiring direct body mounting in multiple orientations
✅ Automated mechanisms requiring stroke-end position feedback via magnetic switches
Why Choose the AirTAC MD10x20S?
The AirTAC MD10x20S simplifies fixture design by allowing direct multi-angle mounting without extra hardware. Its featherweight aluminum construction, built-in magnetic piston, and bumper-cushioned travel ensure crisp, repeatable performance in dense automation layouts.
Selection & Installation Tips
✅ Confirm 10mm bore, 20mm stroke, magnetic piston (S), and M4×0.7 rod thread match your application.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) onto the cylinder body for position detection.
✅ Use M5×0.8 fittings equipped with sealing washers and avoid applying radial side loads to the 4mm piston rod.
Hotline: 0084 787900099