AirTAC SC40x125S – Standard Tie-Rod Pneumatic Cylinder Bore 40 × Stroke 125mm
Looking for a reliable standard tie-rod pneumatic cylinder with strong thrust, smooth deceleration across a 125mm stroke, and built-in magnetic sensing? The AirTAC SC40x125S belongs to the flagship SC series by AirTAC. It features a 40mm bore, 125mm stroke, double-acting operation, and a standard integrated magnet (S).
Key Features of AirTAC SC40x125S
✅ Standard tie-rod pneumatic cylinder (SC series – Double Acting).
✅ Bore: 40 mm.
✅ Stroke: 125 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Adjustable air cushions on both end covers ensure smooth deceleration and prevent end-of-stroke impact across the 125mm travel.
✅ Heterogeneous two-way piston seal with grease-retention structure delivers smooth, lubrication-free performance.
✅ Wide selection of standard mounting brackets (FA, FB, LB, CA, CB, TC) supports flexible installation in any orientation.

Technical Specifications
✅ Model: SC40x125S (SC40X125S)
✅ Series: SC (Standard Tie-Rod Cylinder – Double Acting)
✅ Bore: 40 mm
✅ Stroke: 125 mm
✅ Rod diameter: 16 mm (M12×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Adjustable air cushion at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Operating speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 125mm-stroke pushing, pressing, lifting, and conveyor product sorting mechanisms
✅ Packaging, filling, labeling, food, and beverage production lines
✅ Woodworking, textile, printing, packaging machinery, and industrial component assembly
✅ Automated gates, lifting tables, and heavy-duty clamping fixtures in metalworking plants
✅ Automated systems requiring accurate stroke-end feedback via magnetic switches
Why Choose the AirTAC SC40x125S?
The AirTAC SC40x125S is an industry-favorite standard cylinder known for rugged durability, readily available spare parts, and cost-effectiveness. Its 40mm bore and dual adjustable air cushions deliver steady, controlled linear motion for continuous industrial operation.
Selection & Installation Tips
✅ Confirm 40mm bore, 125mm stroke, magnetic piston (S), and M12×1.25 rod thread match your machine setup.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series with BSC40 tie-rod brackets) for position sensing.
✅ Fine-tune the cushion needle screws on both end caps according to load inertia and pair with speed controllers on the PT 1/4" ports.
Hotline: 0084 787900099