AirTAC MA25x150SCA – Stainless Steel Mini Round Pneumatic Cylinder Bore 25 × Stroke 150mm
Looking for a corrosion-resistant stainless steel mini round pneumatic cylinder with a 150mm stroke, built-in magnet, and flexible pivot mounting? The AirTAC MA25x150SCA belongs to the MA series by AirTAC. It features a 25mm bore, 150mm stroke, double-acting operation, a SUS304 stainless steel barrel, an integrated magnet (S), and a CA pivot rear cover.
Key Features of AirTAC MA25x150SCA
✅ Stainless steel barrel mini round pneumatic cylinder (MA series – SUS304 tube).
✅ Bore: 25 mm.
✅ Stroke: 150 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Pivot-type back cover (CA) enables smooth hinge and clevis articulation.
✅ High-strength SUS304 stainless steel barrel resists corrosion and wear in demanding environments.
✅ Built-in rubber bumpers at both ends reduce impact noise and ensure smooth, lubrication-free operation.

Technical Specifications
✅ Model: MA25x150SCA (MA25X150SCA)
✅ Series: MA (Stainless Steel Mini Round Cylinder)
✅ Bore: 25 mm
✅ Stroke: 150 mm
✅ Rod diameter: 10 mm (M10×1.25 rod thread)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Back cover type: Pivot type (CA)
✅ Operating pressure: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Operating speed: 30 – 800 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 150mm-stroke pushing, diverting, lifting, and angular pivot linkages
✅ Packaging, filling, food, beverage, and pharmaceutical lines requiring a stainless steel barrel
✅ Electronics assembly, textile, printing, and automated medical equipment
✅ Conveyor sorting gates and compact clamping mechanisms in space-limited setups
✅ High-humidity industrial environments requiring superior corrosion resistance
Why Choose the AirTAC MA25x150SCA?
The AirTAC MA25x150SCA pairs a durable SUS304 stainless steel barrel with a versatile CA pivot end cap and standard magnetic piston. It offers higher corrosion resistance and mechanical durability than standard aluminum mini cylinders while maintaining quiet bumper-cushioned motion.
Selection & Installation Tips
✅ Confirm 25mm bore, 150mm stroke, magnetic piston (S), and CA pivot back cover match your machine design.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG/DMSG with BMA25 mounting band) onto the stainless steel barrel.
✅ Pair with compatible pivot brackets (such as SDB) and avoid radial side loads on the 10mm piston rod.
Hotline: 0084 787900099