AirTAC ACQ50x5 – Compact Square Pneumatic Cylinder Bore 50 × Stroke 5mm
Looking for an ultra-short stroke compact pneumatic cylinder that still delivers high thrust force? The AirTAC ACQ50x5 belongs to the JIS standard ACQ series by AirTAC. It features a 50mm bore, 5mm stroke, double-acting operation, an extruded aluminum alloy body, and a standard female-threaded piston rod end.
Key Features of AirTAC ACQ50x5
✅ JIS standard compact square pneumatic cylinder (ACQ series – functionally equivalent to SMC CQ2 series).
✅ Bore: 50 mm (generates high clamping and pushing force within an ultra-short overall length).
✅ Stroke: 5 mm.
✅ Action: Double acting.
✅ Piston rod end: Standard female thread M10×1.5 (select B suffix if a male-threaded rod end is required).
✅ Non-magnetic piston (standard version; choose AirTAC ACQ50x5S if magnetic sensor mounting is needed).
✅ Lightweight, corrosion-resistant tie-rodless aluminum body maximizes space efficiency.
✅ Self-lubricating front rod bearing ensures smooth, durable operation without additional air line lubrication.

Technical Specifications
✅ Model: ACQ50x5 (ACQ50X5)
✅ Series: ACQ (JIS Standard Compact Cylinder – Double Acting)
✅ Bore: 50 mm
✅ Stroke: 5 mm
✅ Rod diameter: 20 mm
✅ Rod end type: Female thread M10×1.5 (standard)
✅ Action: Double acting
✅ Cushioning: Rubber bumper pads at both ends
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure: 0.1 – 1.0 MPa (14 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/4"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (5mm) workpiece clamping, press-fitting, light stamping, and mechanical locking
✅ Machining jigs, automated welding fixtures, and automotive or electronics assembly stations
✅ Conveyor stoppers and compact lifting supports on automated transfer lines
✅ Packaging, filling, textile, and space-restricted industrial machinery
✅ Direct functional replacement for JIS standard compact cylinders such as SMC CQ2B50-5
Why Choose the AirTAC ACQ50x5?
The AirTAC ACQ50x5 combines the robust output force of a 50mm piston with an ultra-compact 5mm stroke housing. Its standardized JIS mounting pattern allows effortless through-hole or bracket installation, while its lubrication-free bearing design keeps maintenance minimal.
Selection & Installation Tips
✅ Confirm 50mm bore, 5mm stroke, and standard M10×1.5 female rod thread (or select AirTAC ACQ50x5B for a male rod thread).
✅ Note that ACQ50x5 is non-magnetic; select AirTAC ACQ50x5S if magnetic stroke-end sensing is required.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Use PT 1/4" pneumatic fittings for the air ports and avoid applying radial side loads to the piston rod.
Hotline: 0084 787900099