AirTAC TCM16x70S – 3-Rod Guided Pneumatic Cylinder Bore 16 × Stroke 70mm with Magnetic Piston
Looking for a pneumatic cylinder with guided movement, anti-rotation capability and better lateral-load support than a conventional cylinder? The AirTAC TCM16x70S belongs to the AirTAC TCM Series and features a three-rod guided cylinder design (Tri-rod Cylinder), a 16mm bore, 70mm stroke, double-acting operation, built-in magnet (S) and brass sliding bearings.
The cylinder combines a pneumatic piston with three parallel guide rods and a moving mounting plate to improve stability during pushing, lifting, clamping and positioning operations. It is suitable for automation mechanisms requiring accurate linear movement within limited installation space.
Key Features of AirTAC TCM16x70S
✅ Three-rod guided pneumatic cylinder from the TCM Series.
✅ Bore: 16 mm.
✅ Stroke: 70 mm.
✅ Action: Double acting.
✅ Guide structure: Three parallel guide rods.
✅ Bearing type: Brass sliding bearing.
✅ Built-in magnetic piston (S) for position sensor installation.
✅ Anti-rotation accuracy: ±0.09° at the fully retracted position.
✅ Air port: M5×0.8.
✅ Three-rod guidance and moving mounting plate improve stability during linear movement.
✅ Brass sliding bearings support guidance and lateral loads within the designed limits.
✅ Fixed TPU anti-collision bumpers at both ends help reduce end-of-stroke impact.
✅ Compatible with AirTAC CMSG, DMSG or EMSG magnetic sensors.

Technical Specifications of AirTAC TCM16x70S
✅ Model: TCM16x70S.
✅ Series: TCM (Tri-rod Guided Cylinder).
✅ Bore: 16 mm.
✅ Stroke: 70 mm.
✅ Acting type: Double acting.
✅ Guide structure: Three guide rods.
✅ Bearing type: Brass Bearing (Sliding Bearing).
✅ Magnet: Yes (Magnetic Piston – S).
✅ Anti-rotation accuracy: ±0.09° at the fully retracted position.
✅ Operating pressure: 0.15–1.0 MPa.
✅ Proof pressure: 1.5 MPa.
✅ Operating temperature: -20°C to +70°C.
✅ Piston speed: 30–500 mm/s.
✅ Air port: M5×0.8.
✅ Port thread: Standard PT; NPT available according to configuration.
✅ Cushioning type: Fixed bumper pads.
✅ Stroke tolerance: +1.0 / 0 mm for strokes up to 100mm.
✅ Working medium: Clean compressed air filtered to 40μm or finer.
✅ Cylinder body material: Aluminum alloy.
✅ Guide bearing material: Brass.
✅ Compatible sensors: CMSG, DMSG, EMSG.
✅ 70mm stroke: Standard stroke configuration for the TCM16 model.
Typical Applications
✅ Component pushing, pulling and positioning mechanisms in automation machinery.
✅ Product clamping mechanisms requiring stability and anti-rotation performance.
✅ Electronic component and precision mechanical assembly equipment.
✅ Automatic material feeding and product sorting systems.
✅ Lifting and transfer mechanisms on conveyor systems.
✅ Packaging, labeling and automated assembly machinery.
✅ Sliding mechanisms requiring lateral-load support within the design limits.
✅ Automation stations requiring magnetic piston-position monitoring.
Why Choose the AirTAC TCM16x70S?
The AirTAC TCM16x70S is a practical choice when a machine mechanism requires linear movement together with improved stability and anti-rotation performance for its mounting plate. Unlike conventional cylinders with a single piston rod, the TCM Series uses three guide rods and brass sliding bearings to support lateral loads and reduce unwanted rotation during operation.
The built-in magnetic piston (S) allows integration with magnetic sensors for stroke monitoring and synchronized PLC control. With a 16mm bore, 70mm stroke and ±0.09° anti-rotation accuracy, this model is suitable for assembly, positioning and component-transfer mechanisms requiring stable movement.
Selection & Installation Tips
✅ Confirm that the 16mm bore and 70mm stroke meet the required output force and travel distance.
✅ Select the TCM version with brass sliding bearings (M). Do not confuse it with the TCL Series, which uses linear ball bearings (L).
✅ Check the M5×0.8 air-port size and select fittings compatible with the specified PT or NPT thread configuration.
✅ Install compatible CMSG, DMSG or EMSG magnetic sensors to monitor piston position.
✅ Supply clean compressed air filtered to 40μm or finer and maintain operating pressure within 0.15–1.0 MPa.
✅ Position the load correctly on the mounting plate and distribute forces evenly to avoid overloading the three guide rods and brass bearings.
✅ Do not use the cylinder as a substitute for a heavy-duty linear guide when the applied load or torque exceeds the manufacturer's permitted limits.
✅ Adjust operating speed using suitable flow-control valves to prevent excessive impact at the end of the stroke.
Hotline: 0084 787900099