AirTAC TCM16x20S – Three-Rod Guided Pneumatic Cylinder Bore 16 × Stroke 20mm
Looking for a compact JIS standard guided pneumatic cylinder with high anti-rotation rigidity and strong side-load resistance? The AirTAC TCM16x20S belongs to the TCM series by AirTAC. It features a 16mm bore, 20mm stroke, double-acting operation, bronze sliding guide bearings (M), and a built-in magnet (S) for sensor mounting, serving as a functional replacement for SMC MGPM series cylinders.
Key Features of AirTAC TCM16x20S
✅ Compact JIS standard three-rod guided pneumatic cylinder (TCM series).
✅ Bore: 16 mm.
✅ Stroke: 20 mm.
✅ Action: Double acting.
✅ Guide bearing type: Bronze sliding bearing (M) offering double the horizontal impact resistance and superior torsional rigidity.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ Dual guide shafts prevent plate rotation and support high radial and torque loads.
✅ Equipped with 4 sensor mounting slots, precision locating pin holes, and selectable top or rear air ports.

Technical Specifications
✅ Model: TCM16x20S (TCM16X20S)
✅ Series: TCM (JIS Standard Three-Rod Guided Cylinder – Bronze Bearing)
✅ Bore: 16 mm
✅ Stroke: 20 mm
✅ Guide rod diameter: 12 mm (bronze sliding bearing)
✅ Action: Double acting
✅ Cushioning: TPU bumper pads at both ends
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Conveyor stoppers, pushers, and product diverters subjected to lateral impact loads
✅ Pick-and-place units and automated electronics or semiconductor assembly stations
✅ Precision clamping, lifting, and workpiece positioning in space-constrained setups
✅ Packaging, labeling, filling, food, and pharmaceutical production machinery
✅ Direct functional replacement for JIS standard guided cylinders such as SMC MGPM16-20
Why Choose the AirTAC TCM16x20S?
The AirTAC TCM16x20S combines a pneumatic drive unit and heavy-duty bronze-bearing guide rods into a single compact housing, eliminating the need for external linear rails. It provides high repeatability, superior side-load resistance, flexible multi-face mounting, and easy sensor integration.
Selection & Installation Tips
✅ Confirm 16mm bore, 20mm stroke, and bronze sliding bearing type (M) match your side-load requirements (or choose TCL series for low-friction ball bearings).
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into any of the four body slots.
✅ Select either the top or rear M5×0.8 air ports for convenient piping and seal the unused ports with the supplied plugs.
Hotline: 0084 787900099