Our News & Events

Home / News
AirTAC MBL32x75UT – Flat-End Mini Round Pneumatic Cylinder Bore 32mm Stroke 75mm Genuine

AirTAC MBL32x75UT – Flat-End Mini Round Pneumatic Cylinder Bore 32mm Stroke 75mm Genuine

Events, Article & Sharing      16/11/2026

AirTAC MBL32x75UT – Flat-End Mini Round Pneumatic Cylinder Bore 32 × Stroke 75mm

Looking for a lightweight mini round pneumatic cylinder with a space-saving flat rear cap? The AirTAC MBL32x75UT belongs to the MBL series by AirTAC (a direct drop-in replacement for the phased-out MAL32x75UT). It features a 32mm bore, 75mm stroke, double-acting operation, a durable aluminum alloy barrel, and a flat-end back cover (UT).

Key Features of AirTAC MBL32x75UT

✅ Mini round pneumatic cylinder with aluminum alloy barrel (MBL series).

✅ Bore: 32 mm.

✅ Stroke: 75 mm.

✅ Action: Double acting.

✅ Flat-end back cover (UT) reduces overall cylinder length compared to round-end or pivot-cap versions.

✅ Non-magnetic piston (standard version; choose AirTAC MBL32x75SUT if magnetic sensor mounting is required).

✅ Riveted rolling-packed cover-to-barrel structure ensures high mechanical strength and leak-free sealing.

✅ Built-in rubber bumpers at both ends minimize impact noise and ensure smooth operation.

Technical Specifications

✅ Model: MBL32x75UT (MBL32X75UT)

✅ Series: MBL (Mini Round Aluminum Barrel Cylinder)

✅ Bore: 32 mm

✅ Stroke: 75 mm

✅ Rod diameter: 12 mm (M10×1.25 rod thread)

✅ Action: Double acting

✅ Cushioning: Rubber bumper

✅ Magnet: No (select S suffix for magnetic piston)

✅ Back cover type: Flat-end type (UT)

✅ Operating pressure: 0.15 – 1.0 MPa

✅ Proof pressure: 1.5 MPa

✅ Operating speed: 30 – 800 mm/s

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ 75mm-stroke pushing, diverting, stopping, and positioning mechanisms in length-restricted machine layouts

✅ Direct functional replacement for legacy AirTAC MAL32x75UT cylinders with identical mounting and force specs

✅ Packaging, filling, food, and pharmaceutical production lines

✅ Electronics assembly, textile, and automated industrial machinery

✅ Fixed front-neck mounting setups (using LB foot or FA flange brackets) where rear pivot clearance is unnecessary

Why Choose the AirTAC MBL32x75UT?

The AirTAC MBL32x75UT pairs the dependable output force of a 32mm bore with a lightweight aluminum body and a compact UT flat rear cover. It saves rear installation clearance, operates quietly with built-in rubber bumpers, and serves as a seamless upgrade for the legacy MAL series.

Selection & Installation Tips

✅ Confirm 32mm bore, 75mm stroke, and flat-end back cover (UT) match your machine clearance requirements.

✅ Note that MBL32x75UT is non-magnetic; select AirTAC MBL32x75SUT if stroke-end magnetic sensing is needed.

✅ Use clean compressed air filtered to 40μm or finer to protect internal two-way piston seals.

✅ Mount the cylinder via its front nose thread (using compatible LB foot or FA flange brackets) and avoid radial side loads on the rod.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login