AirTAC TR16x75S – Dual-Rod Guided Pneumatic Cylinder Bore 16 × Stroke 75mm
Looking for a JIS standard dual-rod guided pneumatic cylinder with high non-rotating precision and strong side-load resistance? The AirTAC TR16x75S belongs to the TR series by AirTAC. It features a 16mm bore, 75mm stroke, double-acting operation, an integrated magnet (S) for sensor mounting, and an adjustable front bumper, serving as a functional replacement for SMC CXS series cylinders.
Key Features of AirTAC TR16x75S
✅ JIS standard dual-rod guided pneumatic cylinder (TR series).
✅ Bore: 16 mm (delivers double the output force of a single-rod cylinder of the same bore).
✅ Stroke: 75 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) included as standard for magnetic position sensor mounting.
✅ High non-rotating accuracy (±0.3°) and strong resistance to bending and twisting via a lengthened lubrication-free sliding support guide.
✅ Multi-position mounting holes on top, sides, and axial ends offer versatile installation options.
✅ Two sets of air intake/exhaust ports on both sides of the body simplify pneumatic piping.
✅ Front barrel bumper allows fine retract-stroke adjustment while absorbing end-of-stroke impact.

Technical Specifications
✅ Model: TR16x75S (TR16X75S)
✅ Series: TR (JIS Standard Dual-Rod Guided Cylinder)
✅ Bore: 16 mm
✅ Stroke: 75 mm
✅ Rod diameter: 8 mm × 2 rods
✅ Action: Double acting
✅ Cushioning: Adjustable bumper
✅ Magnet: Yes (S – standard)
✅ Operating pressure: 0.15 – 1.0 MPa (22 ~ 145 psi)
✅ Proof pressure: 1.5 MPa (215 psi)
✅ Operating speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Pushing, diverting, lifting, and positioning mechanisms requiring strict anti-rotation accuracy
✅ Direct functional replacement for JIS standard twin-rod cylinders such as the SMC CXS series
✅ Electronics, semiconductor, medical device assembly, and precision pick-and-place units
✅ Packaging, filling, labeling, and automated conveyor sorting systems
✅ Space-saving industrial jigs requiring built-in parallel shaft guidance
Why Choose the AirTAC TR16x75S?
The AirTAC TR16x75S doubles the linear thrust of a standard 16mm single-rod actuator while eliminating plate rotation through its parallel twin-rod design. With multi-face mounting holes, dual-side air ports, and stroke-adjusting bumpers, it simplifies machine assembly and boosts repeatability.
Selection & Installation Tips
✅ Confirm 16mm bore, 75mm stroke, and M5×0.8 air ports match your system requirements.
✅ Supply clean compressed air filtered to 40μm or finer to protect internal piston seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the integrated body slots.
✅ Select one pair of side air ports for piping and seal the unused pair with M5 threaded plugs.
Hotline: 0084 787900099