AirTAC MPG10x30 – Compact Plate Pneumatic Cylinder Bore 10 × Stroke 30mm
Looking for an ultra-slim, lightweight pneumatic plate cylinder for tight installation spaces or side-by-side multi-cylinder arrays? The AirTAC MPG10x30 (MPG10X30) belongs to the MPG plate cylinder series by AirTAC. It features a 10mm bore, 30mm stroke, double-acting operation, a standard male-threaded piston rod, and M3×0.5 air ports.
Key Features of AirTAC MPG10x30
✅ Ultra-slim compact plate pneumatic cylinder (MPG series).
✅ Bore: 10 mm.
✅ Stroke: 30 mm.
✅ Action: Double acting.
✅ Piston rod end: Standard male thread M4×0.7.
✅ Non-magnetic piston (standard version; choose AirTAC MPG10x30S if magnetic sensor mounting is required).
✅ Slim, low-mass aluminum alloy body maximizes space efficiency and allows tight side-by-side mounting.
✅ Accurate rod guidance and a rubber-coated rear cover ensure smooth, quiet operation without extra lubrication.

Technical Specifications
✅ Model: MPG10x30 (MPG10X30)
✅ Series: MPG (Plate Cylinder – Standard Double Acting)
✅ Bore: 10 mm
✅ Stroke: 30 mm
✅ Rod diameter: 4 mm
✅ Rod end type: Male thread M4×0.7 (standard)
✅ Action: Double acting
✅ Magnet: No (select S suffix for magnetic piston)
✅ Operating pressure: 0.15 – 0.7 MPa
✅ Proof pressure: 1.2 MPa
✅ Piston speed: 50 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M3 × 0.5
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Small component pushing, diverting, stopping, and positioning in electronics and semiconductor manufacturing
✅ PCB assembly, automated medical devices, optical instruments, and precision machinery
✅ High-speed packaging, labeling, and filling equipment with extremely limited mounting depth
✅ Multi-actuator jigs requiring multiple slim cylinders stacked closely together on a mounting plate
✅ Compact automation stations requiring lightweight, fast-acting linear actuators
Why Choose the AirTAC MPG10x30?
The AirTAC MPG10x30 combines an ultra-flat profile with accurate piston rod guidance, making it effortless to fit into narrow machine slots. With its ready-to-connect male rod thread and lubrication-free design, it provides dependable performance and convenient installation.
Selection & Installation Tips
✅ Confirm 10mm bore, 30mm stroke, and standard M4×0.7 male rod thread match your design requirements.
✅ Note that MPG10x30 is non-magnetic; select AirTAC MPG10x30S if magnetic position sensing is needed.
✅ Supply clean compressed air filtered to 40μm or finer within the 0.15 – 0.7 MPa operating pressure range.
✅ Use M3×0.5 threaded fittings (such as BKC0425-M3) for the air ports and avoid applying radial side loads to the 4mm piston rod.
Hotline: 0084 787900099