AirTAC ACE20x75SB – ISO 21287 Compact Pneumatic Cylinder Bore 20 × Stroke 75mm
Looking for an ISO 21287 international standard compact pneumatic cylinder with a built-in magnet and male-threaded piston rod? The AirTAC ACE20x75SB belongs to the ACE series by AirTAC. It features a 20mm bore, 75mm stroke, double-acting operation, integrated magnet (S), and a male-threaded rod end (B), serving as a functional replacement for SMC C55 and Festo ADN cylinders.
Key Features of AirTAC ACE20x75SB
✅ ISO 21287 standard compact pneumatic cylinder (ACE series).
✅ Bore: 20 mm.
✅ Stroke: 75 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) for magnetic position sensor mounting.
✅ Piston rod end: Male thread M8×1.25 (B option).
✅ Compact body design saves up to 50% installation space compared to ISO 15552 standard cylinders of the same bore.
✅ Hard-anodized cylinder barrel interior provides excellent wear resistance and durability.
✅ Integrated body sensor slots and TPU end bumpers ensure quiet, smooth operation.

Technical Specifications
✅ Model: ACE20x75SB (ACE20X75-S-B)
✅ Series: ACE (ISO 21287 Standard Compact Cylinder)
✅ Bore: 20 mm
✅ Stroke: 75 mm
✅ Rod diameter: 10 mm (S45C steel)
✅ Rod end type: Male thread M8×1.25 (B)
✅ Action: Double acting
✅ Cushioning: TPU bumper pads at both ends
✅ Magnet: Yes (S)
✅ Operating pressure: 0.15 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 75mm-stroke clamping, pushing, stopping, and positioning in space-restricted layouts
✅ Direct drop-in replacement for ISO 21287 cylinders such as SMC C55 and Festo ADN series
✅ Electronics, semiconductor, medical device, and automated packaging machinery
✅ Food, pharmaceutical, textile, and automated conveyor sorting systems
✅ Automated stations requiring magnetic stroke-end position feedback
Why Choose the AirTAC ACE20x75SB?
The AirTAC ACE20x75SB conforms strictly to ISO 21287 mounting dimensions and utilizes a grease-retaining two-way piston seal for extended service life. Equipped with a built-in magnet (S) and M8×1.25 male rod thread (B), it streamlines mechanical assembly and sensor integration.
Selection & Installation Tips
✅ Confirm 20mm bore, 75mm stroke, magnetic piston (S), and male rod thread (B) match your setup.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Pair with M5×0.8 threaded fittings or speed controllers (such as PTLM5) for the air ports.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body slots and avoid radial side loads on the rod.
Hotline: 0084 787900099