AirTAC ACQ20x35SB – Compact Pneumatic Cylinder Bore 20 × Stroke 35mm
Looking for a space-saving JIS standard compact pneumatic cylinder with a built-in magnet and male-threaded piston rod? The AirTAC ACQ20x35SB belongs to the ACQ series by AirTAC. It features a 20mm bore, 35mm stroke, double-acting operation, integrated magnet (S), and a male-threaded rod end (B), serving as a functional replacement for SMC CQ2 series cylinders.
Key Features of AirTAC ACQ20x35SB
✅ JIS standard short-body compact pneumatic cylinder (ACQ series).
✅ Bore: 20 mm.
✅ Stroke: 35 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) for magnetic position sensor mounting.
✅ Piston rod end: Male thread M8×1.25 (B option).
✅ Compact square aluminum alloy body design saves valuable installation space.
✅ Hard-anodized bore interior provides high abrasion resistance and long service life.
✅ Integrated magnetic switch slots around the cylinder body (compatible with DMSG, CMSG, and EMSG sensors).

Technical Specifications
✅ Model: ACQ20x35SB (ACQ20X35SB)
✅ Series: ACQ (JIS Standard Compact Cylinder)
✅ Bore: 20 mm
✅ Stroke: 35 mm
✅ Rod diameter: 10 mm (hard-chrome-plated S45C steel)
✅ Rod end type: Male thread M8×1.25 (B)
✅ Action: Double acting
✅ Cushioning: TPU bumper pads at both ends
✅ Magnet: Yes (S)
✅ Operating pressure: 0.15 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Piston speed: 30 – 500 mm/s
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5 × 0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 35mm-stroke clamping, pushing, stopping, and positioning in tight machine layouts
✅ Electronics, PCB, semiconductor, and automated medical device assembly equipment
✅ High-speed packaging, filling, labeling, and conveyor sorting lines
✅ Direct replacement for JIS standard compact cylinders such as the SMC CQ2 series
✅ Automated workstations requiring magnetic stroke-end position feedback
Why Choose the AirTAC ACQ20x35SB?
The AirTAC ACQ20x35SB pairs a compact JIS footprint with a grease-retaining dual-direction piston seal for smooth, long-lasting performance. Equipped with a built-in magnet (S) and M8×1.25 male rod thread (B), it simplifies mechanical linkage attachment and sensor integration.
Selection & Installation Tips
✅ Confirm 20mm bore, 35mm stroke, magnetic piston (S), and male rod thread (B) match your application.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Pair with M5×0.8 threaded fittings or speed controllers (such as PTLM5) for the air ports.
✅ Mount compatible magnetic switches (CMSG, DMSG, or EMSG) into the body slots and avoid radial side loads on the rod.
Hotline: 0084 787900099