AirTAC MAC32x25SCA – Mini Round Pneumatic Cylinder Bore 32 × Stroke 25mm
Looking for a 25mm-stroke mini round pneumatic cylinder equipped with adjustable air cushioning for smooth deceleration? The AirTAC MAC32x25SCA belongs to the MAC series by AirTAC. It features a 32mm bore, 25mm stroke, double-acting operation, corrosion-resistant stainless steel barrel, built-in magnet (S) for sensor mounting, and a CA pivot back cover.
Key Features of AirTAC MAC32x25SCA
✅ Mini round pneumatic cylinder with adjustable air cushioning (MAC series).
✅ Bore: 32 mm.
✅ Stroke: 25 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) for magnetic position sensor detection.
✅ Pivot-type back cover (CA) for flexible hinge and clevis mounting.
✅ Equipped with adjustable air cushion screws at both ends to absorb high-speed impact.
✅ High-precision stainless steel barrel provides excellent corrosion and wear resistance.

Technical Specifications
✅ Model: MAC32x25SCA
✅ Series: MAC (Mini Round Cylinder with Air Cushion)
✅ Bore: 32 mm
✅ Stroke: 25 mm
✅ Rod diameter: 12 mm (M10×1.25 rod thread)
✅ Action: Double acting
✅ Cushion type: Adjustable air cushion
✅ Magnet: Yes (S)
✅ Back cover type: Pivot type (CA)
✅ Operating pressure: 0.15 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ High-speed, 25mm-stroke pushing, diverting, and positioning mechanisms
✅ Packaging, filling, food, and pharmaceutical production lines
✅ Electronics assembly and automated medical devices requiring low-vibration stops
✅ Pivoting or swinging mechanical linkages utilizing the CA rear cap design
✅ Automated workstations requiring magnetic stroke-end sensing
Why Choose the AirTAC MAC32x25SCA?
The AirTAC MAC32x25SCA stands out with its dual-end adjustable air cushioning that minimizes end-of-stroke shock at high operating speeds, paired with a durable stainless steel body. With a built-in magnet and versatile CA pivot cover, it offers flexible mounting and long-lasting reliability.
Selection & Installation Tips
✅ Confirm 32mm bore, 25mm stroke, and CA pivot mounting match your machine setup.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) for position feedback.
✅ Fine-tune the air cushion needle valves at both ends for smooth deceleration without bounce.
Hotline: 0084 787900099