AirTAC MBL63x200CA – Round Stainless Steel Pneumatic Cylinder Bore 63 × Stroke 200mm
Looking for a high-thrust stainless steel round pneumatic cylinder with a 200mm stroke and flexible pivot mounting? The AirTAC MBL63x200CA belongs to the MBL series by AirTAC. It features a 63mm bore, 200mm stroke, double-acting operation, corrosion-resistant stainless steel barrel, built-in magnet (S) for sensor mounting, and a CA pivot back cover.
Key Features of AirTAC MBL63x200CA
✅ Round stainless steel pneumatic cylinder (MBL series).
✅ Bore: 63 mm (high output thrust).
✅ Stroke: 200 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) for magnetic position sensor detection.
✅ Pivot-type back cover (CA) for flexible hinge and clevis mounting.
✅ High-grade stainless steel cylinder barrel providing excellent corrosion resistance.
✅ Adjustable air cushioning at both ends ensures smooth deceleration and quiet operation.

Technical Specifications
✅ Model: MBL63x200CA
✅ Series: MBL (Round Stainless Steel Cylinder)
✅ Bore: 63 mm
✅ Stroke: 200 mm
✅ Rod diameter: 20 mm (M16×1.5 rod thread)
✅ Action: Double acting
✅ Magnet: Yes (S)
✅ Back cover type: Pivot type (CA)
✅ Operating pressure: 0.1 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 3/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Packaging, filling, food, and pharmaceutical production lines
✅ High-force pushing, diverting, and lifting mechanisms with a 200mm stroke
✅ Pivoting or swinging mechanical linkages utilizing the CA rear cap design
✅ Automated machinery operating in humid or washdown environments
✅ Industrial automation systems requiring magnetic stroke-end sensing
Why Choose the AirTAC MBL63x200CA?
The AirTAC MBL63x200CA pairs the strong output force of a 63mm bore with a durable, corrosion-resistant stainless steel barrel. Equipped with a built-in magnet, adjustable cushioning, and a versatile CA pivot end cap, it delivers smooth motion, easy sensor integration, and long service life.
Selection & Installation Tips
✅ Confirm 63mm bore, 200mm stroke, and CA pivot mounting match your machine requirements.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) for stroke-end feedback.
✅ Pair with compatible pivot brackets, adjust cushioning screws, and avoid radial side loads on the rod.
Hotline: 0084 787900099