AirTAC SDA32x45B – Compact Pneumatic Cylinder Bore 32 × Stroke 45mm
Looking for a space-saving compact pneumatic cylinder with strong thrust for tight installation layouts? The AirTAC SDA32x45B belongs to the SDA series by AirTAC. It features a 32mm bore, 45mm stroke, double-acting operation, and a male-threaded piston rod (B), making it ideal for clamping, pushing, and positioning in automation machinery.
Key Features of AirTAC SDA32x45B
✅ Compact short-body pneumatic cylinder (SDA series).
✅ Bore: 32 mm.
✅ Stroke: 45 mm.
✅ Action: Double acting.
✅ Piston rod end: Male thread M10×1.25 (B option).
✅ Compact square aluminum alloy body design significantly saves installation length.
✅ Through-hole body mounting allows easy installation without extra mounting brackets.
✅ Built-in rubber bumper pads at both ends for quiet operation and low maintenance.

Technical Specifications
✅ Model: SDA32x45B
✅ Series: SDA (Compact Cylinder)
✅ Bore: 32 mm
✅ Stroke: 45 mm
✅ Rod diameter: 16 mm
✅ Rod end type: Male thread M10×1.25 (B)
✅ Action: Double acting
✅ Magnet: No (select S version if magnetic sensor mounting is required)
✅ Operating pressure: 0.1 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ 45mm stroke clamping, stopping, and positioning mechanisms requiring strong output force
✅ Electronics, PCB, and semiconductor assembly machinery
✅ High-speed packaging, labeling, and sorting lines
✅ Testing jigs and light-pressing fixtures with restricted mounting space
✅ Mechanical linkages requiring direct connection to an M10 male rod thread
Why Choose the AirTAC SDA32x45B?
The AirTAC SDA32x45B offers a short overall length, direct body mounting convenience, and a ready-to-connect male-threaded piston rod. It delivers reliable thrust, fast response, and long service life for space-constrained industrial automation systems.
Selection & Installation Tips
✅ Confirm 32mm bore, 45mm stroke, and male rod thread (B) match your application requirements.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Pair with PT 1/8" threaded fittings or speed controllers for the air ports.
✅ Align the load along the piston rod axis to avoid excessive side loading.
Hotline: 0084 787900099