AirTAC MBL20x75CA – ISO 6432 Mini Round Pneumatic Cylinder Bore 20 × Stroke 75mm
Looking for a compact ISO 6432 stainless steel mini pneumatic cylinder with flexible pivot mounting? The AirTAC MBL20x75CA belongs to the MBL series by AirTAC. It features a 20mm bore, 75mm stroke, double-acting operation, corrosion-resistant stainless steel barrel, built-in magnet (S) for sensor mounting, and a CA pivot back cover, making it ideal for space-saving automation systems.
Key Features of AirTAC MBL20x75CA
✅ ISO 6432 standard mini round pneumatic cylinder (MBL series).
✅ Bore: 20 mm.
✅ Stroke: 75 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) for magnetic position sensor detection.
✅ Pivot-type back cover (CA) for flexible hinge and clevis mounting.
✅ High-grade stainless steel cylinder barrel providing excellent corrosion resistance.
✅ Built-in rubber bumpers at both ends minimize impact noise and ensure smooth operation.

Technical Specifications
✅ Model: MBL20x75CA
✅ Series: MBL (ISO 6432 Mini Stainless Steel Cylinder)
✅ Bore: 20 mm
✅ Stroke: 75 mm
✅ Rod diameter: 8 mm (M8×1.25 rod thread)
✅ Action: Double acting
✅ Magnet: Yes (S)
✅ Back cover type: Pivot type (CA)
✅ Operating pressure: 0.1 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: G1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Packaging, filling, food, and pharmaceutical production lines
✅ Electronics, PCB, and automated medical device assembly equipment
✅ 75mm stroke pushing, diverting, and sorting mechanisms on conveyors
✅ Pivoting or swinging mechanical linkages utilizing the CA rear cap design
✅ Industrial machinery requiring ISO 6432 dimensional interchangeability
Why Choose the AirTAC MBL20x75CA?
The AirTAC MBL20x75CA delivers reliable ISO 6432 compliance, combining a durable stainless steel body with a compact, lightweight footprint. Equipped with a built-in magnet and a versatile CA pivot end cap, it ensures smooth motion, easy sensor integration, and long service life.
Selection & Installation Tips
✅ Confirm 20mm bore, 75mm stroke, and CA pivot mounting match your machine requirements.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) for stroke-end feedback.
✅ Pair with compatible pivot brackets and avoid excessive radial side loads on the piston rod.
Hotline: 0084 787900099