AirTAC TMICM25x150S – Three-Rod Guided Pneumatic Cylinder Bore 25 × Stroke 150mm
Looking for a compact guided pneumatic cylinder with strong anti-rotation rigidity and high side-load resistance? The AirTAC TMICM25x150S belongs to the TMICM series by AirTAC. It features a 25mm bore, 150mm stroke, double-acting operation, plain bronze guide bearings (M), and a built-in magnet (S), making it ideal for lifting, pushing, and stopper applications in automation.
Key Features of AirTAC TMICM25x150S
✅ Compact three-rod guided pneumatic cylinder (TMICM series).
✅ Bore: 25 mm.
✅ Stroke: 150 mm.
✅ Action: Double acting.
✅ Guide bearing type: Plain bearing (M) for high lateral load and shock resistance.
✅ Built-in magnet (S) for magnetic position sensor mounting.
✅ Dual guide shafts prevent plate rotation and provide high torsional rigidity.
✅ Integrated sensor slots and flexible top/rear air port connections for easy piping.

Technical Specifications
✅ Model: TMICM25x150S
✅ Series: TMICM (Three-Rod Guided Cylinder – Plain Bearing)
✅ Bore: 25 mm
✅ Stroke: 150 mm
✅ Guide rod diameter: 16 mm (plain bearing)
✅ Action: Double acting
✅ Magnet: Yes (S)
✅ Operating pressure: 0.15 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: PT 1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Lifting, transferring, and pushing heavy loads along conveyor lines
✅ Pick-and-place units and automated component assembly stations
✅ Clamping and conveyor stopper mechanisms exposed to high side loads
✅ Packaging, labeling, electronics, and food processing machinery
✅ Space-saving automation setups requiring integrated anti-rotation guidance
Why Choose the AirTAC TMICM25x150S?
The AirTAC TMICM25x150S integrates a pneumatic actuator with heavy-duty plain-bearing guide rods in a single compact unit, eliminating the need for external guide rails. It delivers high repeatability, strong side-load support, easy sensor mounting, and long-term durability.
Selection & Installation Tips
✅ Confirm 25mm bore, 150mm stroke, and plain bearing type (M) match your load and speed requirements.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) into the body sensor slots.
✅ Choose either the top or rear air ports for piping and seal the unused ports with the supplied plugs.
Hotline: 0084 787900099