Our News & Events

Home / News
AirTAC SE32x300S – Profile Standard Pneumatic Cylinder Bore 32mm Stroke 300mm Genuine

AirTAC SE32x300S – Profile Standard Pneumatic Cylinder Bore 32mm Stroke 300mm Genuine

Events, Article & Sharing      14/11/2026

AirTAC SE32x300S – Profile Standard Pneumatic Cylinder Bore 32 × Stroke 300mm

Looking for a clean-profile standard pneumatic cylinder without external tie-rods and ready for sensor mounting? The AirTAC SE32x300S belongs to the SE series by AirTAC. It features a 32mm bore, 300mm stroke, double-acting operation, an extruded aluminum profile barrel with integrated sensor slots, a built-in magnet (S), and adjustable cushioning.

Key Features of AirTAC SE32x300S

✅ Tie-rodless profile standard pneumatic cylinder (SE series).

✅ Bore: 32 mm.

✅ Stroke: 300 mm.

✅ Action: Double acting.

✅ Built-in magnet (S) for magnetic position sensor detection.

✅ Clean extruded aluminum barrel without external tie-rods prevents dust accumulation.

✅ Integrated T-slots along the barrel allow neat, direct mounting of magnetic sensors.

✅ Adjustable air cushioning at both ends ensures smooth and quiet deceleration.

Technical Specifications

✅ Model: SE32x300S

✅ Series: SE (Profile Standard Cylinder – Tie-rodless)

✅ Bore: 32 mm

✅ Stroke: 300 mm

✅ Rod diameter: 12 mm (M10×1.25 rod thread)

✅ Action: Double acting

✅ Magnet: Yes (S)

✅ Operating pressure: 0.15 – 1.0 MPa

✅ Proof pressure: 1.5 MPa

✅ Operating temperature: -20°C ~ +70°C

✅ Port size: PT 1/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Packaging, filling, food, and pharmaceutical lines requiring clean-profile actuators

✅ Automated assembly machinery and 300mm stroke conveyor sorting systems

✅ Automation equipment requiring multi-point stroke position sensing

✅ Woodworking, textile, printing, and electronics manufacturing machinery

✅ Drop-in dimensional replacement for standard SC32x300S tie-rod cylinders

Why Choose the AirTAC SE32x300S?

The AirTAC SE32x300S combines a sleek, dust-resistant extruded aluminum profile with built-in magnetic sensing and integrated sensor grooves. It offers easy installation, clean aesthetics, and long-term reliability for modern industrial pneumatic systems.

Selection & Installation Tips

✅ Confirm 32mm bore and 300mm stroke match your required travel distance.

✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.

✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) directly into the barrel T-slots.

✅ Adjust the cushioning screws properly and avoid side loads on the piston rod at full 300mm extension.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login