Our News & Events

Home / News
AirTAC SC80x250 – Standard Pneumatic Cylinder Bore 80mm Stroke 250mm Genuine

AirTAC SC80x250 – Standard Pneumatic Cylinder Bore 80mm Stroke 250mm Genuine

Events, Article & Sharing      14/11/2026

AirTAC SC80x250 – Standard Pneumatic Cylinder Bore 80 × Stroke 250mm

Looking for a heavy-duty standard pneumatic cylinder with strong thrust and long stroke? The AirTAC SC80x250 belongs to the SC series by AirTAC. It features an 80mm bore, 250mm stroke, double-acting operation, robust tie-rod construction, and adjustable pneumatic cushioning at both ends. Ideal for industrial automation machinery requiring high force and reliable performance.

Key Features of AirTAC SC80x250

✅ Standard tie-rod pneumatic cylinder (SC series).

✅ Bore: 80 mm.

✅ Stroke: 250 mm.

✅ Action: Double acting.

✅ Without magnet (standard version; choose SC80x250S for magnetic sensor mounting).

✅ High-reliability tie-rod design for heavy load resistance.

✅ Adjustable air cushioning at both ends for smooth deceleration.

✅ Two-way piston seal structure with grease reservation for long service life.

Technical Specifications

✅ Model: SC80x250

✅ Series: SC (Standard Tie-Rod Cylinder)

✅ Bore: 80 mm

✅ Stroke: 250 mm

✅ Rod diameter: 25 mm (M20×1.5 rod thread)

✅ Action: Double acting

✅ Magnet: No (select S suffix for magnetic piston)

✅ Operating pressure: 0.15 – 1.0 MPa

✅ Proof pressure: 1.5 MPa

✅ Temperature: -20°C ~ +70°C

✅ Port size: PT 3/8"

✅ Fluid: Air (filtered by 40μm filter element)

Typical Applications

✅ Pneumatic pressing, stamping, and heavy lifting mechanisms

✅ Industrial production lines, conveyors, and sorting systems

✅ Packaging, woodworking, ceramic tile, and material processing machinery

✅ Large-scale pushing and clamping operations with 250mm travel

✅ General industrial equipment requiring versatile mounting accessories

Why Choose the AirTAC SC80x250?

The AirTAC SC80x250 delivers strong output force from its 80mm bore, combined with a sturdy tie-rod body and smooth adjustable cushioning. It is well suited for demanding industrial pneumatic systems that require high stability, easy accessory mounting, and long-term durability.

Selection & Installation Tips

✅ Confirm 80mm bore and 250mm stroke match the required force and travel.

✅ Use clean compressed air filtered to 40μm or finer.

✅ Note that SC80x250 has no magnet; select AirTAC SC80x250S if magnetic sensors are needed.

✅ Adjust the cushioning screws properly and avoid side loads on the piston rod during operation.

Hotline: 0084 787900099

Social Share

Related Posts

hotline
Working hours: 9:00 - 18:00 (Excluding Saturday and Sunday)
©T Solution industry Vietnam Co., LTD2026. Login