AirTAC MBL32x75CA – ISO 6432 Mini Round Pneumatic Cylinder Bore 32 × Stroke 75mm
Looking for a reliable ISO 6432 stainless steel mini pneumatic cylinder with flexible pivot mounting? The AirTAC MBL32x75CA belongs to the MBL series by AirTAC. It features a 32mm bore, 75mm stroke, double-acting operation, corrosion-resistant stainless steel barrel, built-in magnet (S) for sensor mounting, and a CA pivot back cover, making it ideal for standard industrial automation setups.
Key Features of AirTAC MBL32x75CA
✅ ISO 6432 standard mini round pneumatic cylinder (MBL series).
✅ Bore: 32 mm.
✅ Stroke: 75 mm.
✅ Action: Double acting.
✅ Built-in magnet (S) for magnetic position sensor detection.
✅ Pivot-type back cover (CA) for flexible hinge and clevis mounting.
✅ High-grade stainless steel cylinder barrel providing excellent corrosion resistance.
✅ Stable operation with high sealing performance to minimize air leakage.

Technical Specifications
✅ Model: MBL32x75CA
✅ Series: MBL (ISO 6432 Mini Stainless Steel Cylinder)
✅ Bore: 32 mm
✅ Stroke: 75 mm
✅ Rod diameter: 10 mm (M10×1.25 rod thread)
✅ Action: Double acting
✅ Magnet: Yes (S)
✅ Back cover type: Pivot type (CA)
✅ Operating pressure: 0.1 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: G1/8"
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Automated assembly lines, packaging machinery, and food processing equipment
✅ 75mm stroke pushing, clamping, and sorting mechanisms on conveyors
✅ Industrial machinery requiring ISO 6432 dimensional interchangeability
✅ Pivoting or swinging mechanical linkages utilizing the CA rear cap design
✅ Medical devices and automated workstations requiring reliable compact actuators
Why Choose the AirTAC MBL32x75CA?
The AirTAC MBL32x75CA delivers dependable ISO 6432 compliance, combining a sturdy stainless steel body with excellent corrosion resistance and long operating life. Equipped with a built-in magnet and a versatile CA pivot end cap, it ensures quick setup and precise control in demanding pneumatic applications.
Selection & Installation Tips
✅ Confirm 32mm bore, 75mm stroke, and CA pivot mounting match your machine requirements.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Mount compatible magnetic sensors (such as CMSG or DMSG series) securely for position feedback.
✅ Avoid excessive radial side loads on the piston rod at full 75mm extension to prevent wear.
Hotline: 0084 787900099