AirTAC SDA25x5B – Compact Pneumatic Cylinder Bore 25 × Stroke 5mm
Looking for an ultra-compact pneumatic cylinder with a short stroke for tight installation spaces? The AirTAC SDA25x5B belongs to the SDA series by AirTAC. It features a 25mm bore, 5mm stroke, double-acting operation, and a male-threaded piston rod (B), making it ideal for short-stroke clamping, pushing, and positioning in automation machinery.
Key Features of AirTAC SDA25x5B
✅ Ultra-compact pneumatic cylinder (SDA series).
✅ Bore: 25 mm.
✅ Stroke: 5 mm.
✅ Action: Double acting.
✅ Piston rod end: Male thread M8×1.25 (B option).
✅ Compact square body design significantly saves installation space.
✅ Through-hole body mounting allows easy installation without extra mounting brackets.
✅ Built-in rubber bumper pads at both ends for quiet operation and low maintenance.

Technical Specifications
✅ Model: SDA25x5B
✅ Series: SDA (Compact Cylinder)
✅ Bore: 25 mm
✅ Stroke: 5 mm
✅ Rod diameter: 12 mm
✅ Rod end type: Male thread M8×1.25 (B)
✅ Action: Double acting
✅ Magnet: No (select S version if magnetic sensor mounting is required)
✅ Operating pressure: 0.1 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Operating temperature: -20°C ~ +70°C
✅ Port size: M5×0.8
✅ Fluid: Air (filtered by 40μm filter element)
Typical Applications
✅ Short-stroke (5mm) clamping, stopping, and positioning mechanisms
✅ Electronics, PCB, and semiconductor assembly machinery
✅ High-speed packaging, labeling, and sorting lines
✅ Testing jigs and fixtures with restricted mounting space
✅ Mechanical linkages requiring direct connection to an M8 male rod thread
Why Choose the AirTAC SDA25x5B?
The AirTAC SDA25x5B offers an exceptionally short overall length, direct body mounting convenience, and a ready-to-connect male-threaded piston rod. It delivers reliable thrust, fast response, and long service life for space-constrained industrial automation systems.
Selection & Installation Tips
✅ Confirm 25mm bore, 5mm stroke, and male rod thread (B) match your application requirements.
✅ Use clean compressed air filtered to 40μm or finer to protect internal seals.
✅ Pair with M5×0.8 threaded fittings or speed controllers for the air ports.
✅ Align the load along the piston rod axis to avoid excessive side loading.
Hotline: 0084 787900099