AirTAC F-M18X150F – Pneumatic Cylinder Floating Joint M18 × 1.5
Looking for a precision piston-rod coupling to absorb misalignment between your pneumatic cylinder and driven load? The AirTAC F-M18X150F is a ball-head floating joint from AirTAC. It features standard M18×1.5 threads, ±7° angular compensation, and heavy-duty steel construction, designed for 50mm and 63mm bore cylinders to prevent side-load wear.
Key Features of AirTAC F-M18X150F
✅ Pneumatic cylinder piston-rod floating joint (F-M series).
✅ Thread size: M18 × 1.5 (matched rod and mounting end threads).
✅ Angular compensation: ±7° from centerline.
✅ Overall length: 92 mm, precision-machined high-strength steel body.
✅ Effectively absorbs eccentricity and alignment errors between cylinder rod and load.
✅ Reduces side-load friction, preventing rod binding and extending cylinder seal life.
✅ Simple installation and adjustment with included locking nuts.

Technical Specifications
✅ Model: F-M18X150F
✅ Series: F-M (Floating Joint Accessory)
✅ Thread specification: M18 × 1.5
✅ Allowable swing angle: ±7°
✅ Overall length (MA): 92 mm
✅ Outer body diameter (MD): 41 mm
✅ Matched cylinder series: JSI, ACQ (50mm and 63mm bore sizes)
✅ Material: Corrosion-resistant plated alloy steel
✅ Application medium: Industrial pneumatic actuator linkages
Typical Applications
✅ Connecting pneumatic cylinder rods to slides, pushers, or mechanical linkages
✅ Machinery setups where minor coaxial misalignment occurs during assembly or operation
✅ Automated packaging, pressing, and assembly production lines
✅ Clamping and lifting mechanisms using 50mm or 63mm bore cylinders
✅ High-cycle or long-stroke pneumatic systems requiring rod protection
Why Choose the AirTAC F-M18X150F?
The AirTAC F-M18X150F eliminates harmful bending moments caused by axis misalignment without requiring ultra-tight machining tolerances on mounting brackets. Its durable ball-joint construction and exact M18×1.5 threading ensure smooth motion and longer cylinder service life.
Selection & Installation Tips
✅ Confirm your cylinder piston rod thread is M18×1.5 (standard on 50mm/63mm JSI and ACQ cylinders).
✅ Ensure operating misalignment stays within the ±7° angular allowance.
✅ Tighten the supplied lock nuts securely after adjusting the axial mounting position.
✅ Use proper linear guides for heavy radial loads rather than relying solely on the floating joint.
Hotline: 0084 787900099