AirTAC 2SA150-15 – 2/2 Way Fluid Control Solenoid Valve Port 1/2″
Looking for a 2-port 2-position solenoid valve for air, water or oil? The AirTAC 2SA150-15 belongs to the 2SA series by Airtac. It is a 2/2-way, internally piloted, normally closed valve with PT1/2″ ports, approximately 15mm orifice, SUS304 stainless steel body, suitable for on/off control of air, water and oil in industrial fluid systems.
Key Features of AirTAC 2SA150-15
✅ 2/2 way solenoid valve (2-port 2-position).
✅ Type: Internally piloted, Normally Closed.
✅ Port size: 1/2″ (PT / G / NPT depending on version).
✅ Orifice diameter: approx. 15 mm.
✅ Body material: SUS304 stainless steel.
✅ Media: Air, water, oil.
✅ Operating pressure: approx. 0.05 – 1.0 MPa.
✅ Coil available in AC or DC (depending on full model code).

Technical Specifications
✅ Model: 2SA150-15
✅ Series: 2SA (Fluid Control Valve)
✅ Type: 2/2 Way, Normally Closed
✅ Port size: 1/2″
✅ Orifice: ~15 mm
✅ Cv / effective area: approx. 5.5 / 100 mm²
✅ Body: SUS304
✅ Seal: FPM (typical)
✅ Operating pressure: 0.05 – 1.0 MPa
✅ Proof pressure: 1.5 MPa
✅ Temperature: Air -20~90°C, Water 1~80°C (reference)
✅ Fluid: Air, Water, Oil
Typical Applications
✅ On/off control of water, air and oil
✅ Water supply and treatment systems
✅ Automation machinery
✅ Lubrication and light hydraulic oil systems
✅ Applications requiring a 2/2 way 1/2″ stainless steel solenoid valve
Why Choose the AirTAC 2SA150-15?
The AirTAC 2SA150-15 features a corrosion-resistant stainless steel body, relatively high flow thanks to the 15mm orifice, normally closed design for safety on power loss, and interchangeable coils for different voltages. It is suitable for many industrial fluid control systems.
Selection & Installation Tips
✅ Confirm 1/2″ ports and the required coil voltage (AC220V / DC24V…).
✅ Install according to the flow direction arrow.
✅ Use clean media within the rated temperature and pressure.
✅ Check FPM seal compatibility with oil/chemicals if applicable.
Hotline: 0084 787900099