WanerF DSG-03-3C60-D24-B – NG10 4/3 Hydraulic Solenoid Directional Valve, 3C60 Spool, DC24V

✅ WanerF DSG-03-3C60-D24-B is a hydraulic solenoid directional valve from the DSG-03 Series, designed to control hydraulic flow direction and actuator operating conditions in industrial hydraulic systems.

✅ The model uses a 3C60 spool in a 4/3 directional valve with three operating positions. The 3C60 configuration provides P-to-T flow in the center position, making it suitable for hydraulic circuits where pump flow needs to return to the tank when the valve is centered.

✅ The DSG-03 is an NG10 / Size 03 hydraulic directional valve suitable for higher-flow systems than size 02 valves. Its sub-plate mounting design allows integration into hydraulic manifolds and centralized control assemblies.

✅ The D24 designation indicates a DC24V solenoid coil, suitable for PLC cabinets, automated machinery and industrial control systems using 24VDC power.

✅ The B designation identifies the electrical connector configuration. When the corresponding solenoid is energized, the spool shifts and changes the hydraulic flow path.

✅ The 3C60 configuration supports relatively high flow capacity, with a reference maximum flow of approximately 100 L/min on the working paths depending on pressure. The center P–T flow has a separate pressure-dependent limitation.

✅ WanerF DSG-03-3C60-D24-B is suitable for hydraulic presses, stamping machines, lifting systems, machining equipment and automated hydraulic circuits requiring DC24V electrical control.

Technical Specifications

✅ Product name: Hydraulic solenoid directional valve

✅ Brand: WanerF

✅ Series: DSG-03

✅ Model: DSG-03-3C60-D24-B

✅ Valve type: 4/3 hydraulic solenoid directional valve

✅ Spool type: 3C60

✅ Center function: P connected to T according to the 3C60 configuration

✅ Positions: 3

✅ Ports: 4

✅ Nominal size: NG10 / Size 03

✅ Control type: Double solenoid

✅ Solenoid voltage: DC24V

✅ Electrical connector: B

✅ Reference maximum working flow: Approximately 100 L/min on the working paths, depending on pressure

✅ Center P–T flow: Limited according to pressure and circuit configuration

✅ Reference maximum working pressure: Up to approximately 31.5 MPa according to configuration

✅ Working medium: Hydraulic oil

✅ Mounting type: Sub-plate / manifold mounting

Advantages

✅ 4/3 configuration with three operating positions

✅ 3C60 spool provides P-to-T flow in the center position

✅ Suitable for pump unloading functions in compatible circuits

✅ DC24V coil for convenient PLC integration

✅ NG10 design for relatively high-flow hydraulic systems

✅ Compact manifold installation

✅ Electrical hydraulic directional control

✅ Suitable for automated industrial hydraulic systems

Applications

✅ Hydraulic presses

✅ Stamping and forming machines

✅ Hydraulic lifting systems

✅ Hydraulic cylinder control

✅ Hydraulic motor control

✅ Machining equipment

✅ Hydraulic manifolds

✅ Pump unloading circuits

✅ Industrial automation machinery

✅ PLC-controlled hydraulic systems

Hotline: 0084 787900099