WanerF DSG-03-3C5-A220-B – NG10 4/3 Hydraulic Solenoid Directional Valve, 3C5 Spool, AC220V

✅ WanerF DSG-03-3C5-A220-B is a hydraulic solenoid directional valve from the DSG-03 Series, designed to control hydraulic oil flow to actuators such as hydraulic cylinders and motors in industrial hydraulic systems.

✅ The DSG-03-3C5-A220-B uses a 3C5 spool in a 4/3 directional valve, providing three operating positions with spring-centering. This configuration is suitable for hydraulic circuits requiring a defined center condition between two directional operating states.

✅ The DSG-03 features a nominal NG10 / Size 03 configuration, suitable for hydraulic systems requiring higher flow capacity than size 02 valves. Its sub-plate mounting design allows convenient integration into hydraulic manifolds and centralized control assemblies.

✅ The A220 designation indicates an AC220V solenoid coil, suitable for industrial electrical control cabinets. The B designation identifies the electrical connector configuration.

✅ For the 3C5 spool configuration, flow capacity depends on pressure and flow path. The main working-line reference flow is approximately 30 L/min, while center P–T flow is limited according to circuit pressure and operating conditions.

✅ WanerF DSG-03-3C5-A220-B is suitable for hydraulic presses, stamping equipment, machining machinery, lifting systems and industrial automation requiring electrically controlled hydraulic direction.

Technical Specifications

✅ Product name: Hydraulic solenoid directional valve

✅ Brand: WanerF

✅ Series: DSG-03

✅ Model: DSG-03-3C5-A220-B

✅ Valve type: 4/3 hydraulic solenoid directional valve

✅ Spool type: 3C5

✅ Positions: 3

✅ Ports: 4

✅ Return mechanism: Spring centered

✅ Nominal size: NG10 / Size 03

✅ Solenoid voltage: AC220V

✅ Electrical connector: B

✅ Reference flow rate: Approximately 30 L/min on the main working paths, depending on pressure

✅ Center P–T flow: Depends on pressure and circuit configuration

✅ Reference maximum working pressure: Up to approximately 31.5 MPa according to configuration

✅ Working medium: Hydraulic oil

✅ Mounting type: Sub-plate / manifold mounting

Advantages

✅ 4/3 configuration with three operating positions

✅ 3C5 spool for circuits requiring a defined center condition

✅ Spring-centered design returns the valve to center when the control signal is removed

✅ AC220V coil for industrial control systems

✅ NG10 size for relatively high-flow hydraulic applications

✅ Compact manifold installation

✅ Electrically controlled hydraulic directional switching

✅ Suitable for automated hydraulic systems

Applications

✅ Hydraulic presses

✅ Metal stamping and forming machines

✅ Machining equipment

✅ Hydraulic cylinder control systems

✅ Hydraulic motor control systems

✅ Lifting equipment

✅ Hydraulic manifolds

✅ Industrial automation machinery

✅ Automated production lines

✅ PLC-controlled hydraulic systems

Hotline: 0084 787900099