Airtac RMT16x150S – Magnetic Coupling Rodless Cylinder Ø16×150

Looking for a rodless pneumatic cylinder that saves installation space with a long stroke? The Airtac RMT16x150S belongs to the RMT series by Airtac, magnetic coupling rodless type with guide rods, 16mm bore, 150mm stroke, with magnet (S). Without a protruding piston rod, it requires less space than conventional cylinders while allowing longer strokes.

Key Features of Airtac RMT16x150S

✅ Magnetic coupling rodless cylinder.
✅ Bore 16 mm, Stroke 150 mm.
✅ With magnet (S).
✅ Guide rod type.
✅ Double acting.
✅ No mechanical connection between piston and slider → excellent sealing.
✅ Space-saving design with longer stroke capability.
✅ Fixed cushion, optional hydraulic shock absorber.

Technical Specifications

✅ Model: RMT16x150S
✅ Series: RMT (Magnetic Coupling Rodless Cylinder)
✅ Bore: 16 mm
✅ Stroke: 150 mm
✅ Acting type: Double acting
✅ Magnet: Yes (S)
✅ Operating pressure: 0.2 – 0.7 MPa
✅ Proof pressure: 1.2 MPa
✅ Temperature: -20°C ~ +70°C
✅ Speed range: 50 – 400 mm/s
✅ Port size: M5×0.8
✅ Safe holding force: approx. 140 N

Typical Applications

✅ Linear motion systems requiring long stroke
✅ Automation machinery with limited space
✅ Conveying and product pushing lines
✅ Applications needing good dust protection (piston separated from slider)
✅ Replacement of conventional rod cylinders to save space

Why Choose the Airtac RMT16x150S?

The Airtac RMT16x150S uses magnetic coupling so there is no external piston rod, saving installation space, allowing longer strokes, providing better dust protection and including guide rods for side-load capacity. It is ideal for modern automation systems.

Selection & Installation Tips

✅ Confirm 16mm bore, 150mm stroke and magnet (S) requirement.
✅ Use clean air filtered to ≥ 40μm.
✅ Install according to guide rod orientation for best side-load performance.
✅ Magnetic sensors can be mounted thanks to the built-in magnet.

Hotline: 0084 787900099